Kynn Generator KT12.5 – KT13.5S (1500 rpm) powered by Kubota

التصنيف:

الوصف

The above ratings represent the generating set capability guaranteed within ±3%
at the reference conditions equivalent to those specified in ISO 8528/1standard.

NOTES

1. The applicable voltage range is 380V to 415V for 50Hz applications. For other voltages, please consult factory.
2. This generating set is of fixed speed of 1500rpm.
3. KT12.5 is the prime power rating of the generating set, where a variable load and
unlimited hours usage are applied with an average load factor of 80% average of the
prime rating over each 24-hour period.
Noting that a 10% overload is permitted for 1 hour in every 12-hour operation.
4. KT13.5S is the standby power rating of the generating set, where a variable load
limited to an annual usage up to 500 hours is applied, with 300 hours of which may be
continous running. Noting that no overloads is permitted.

Engine Technical Data

Make & Model

KUBOTA V1505-E2-BG

Cylinders & Arrangement

4; vertical in-line

Bore & Stroke (mm)

78 x 78.4

Induction system

Naturally aspirated

Combustion

Indirect injection

Cycle

4 stroke

Compression ratio

23:1

Cooling System

Water cooled

Displacement

1.498 liters

Lube oil capacity

6.0 liters Max

Coolant capacity

6.7 liters

Standard governor (Optional)

Mechanical +/-5% (Electronic)

Engine Speed

1500 rpm

Fuel Consumption @ 100% Load

3.23 (L/H)

Fuel Consumption @ 75% Load

2.43 (L/H)

Fuel Consumption @ 50% Load

1.62 (L/H)

Fuel Consumption @ 25% Load

0.81 (L/H)

Radiator Cooling Air Flow (m3/s)

0.48

Emissions regulations

For non-regulated territories

Exhaust temperature ᵒC (max)

500

Max exhaust gas flow (m3/min)

2.99

Max. allowed back pressure (kPa)

7.1

The above performance data are valid as per the following specs:

  • Diesel Fuel is according to BS2869 Class A2 or equivalent.

  • Lubricating oil is according to Grade SAE 15W-40 API CI4.

  • The coolant should be 50% antifreeze and 50% fresh water.

    Alternator Technical Data

    Make & Model

    Leroy Somer TAL040F

    Frequency / No. of poles

    50 Hz / 4P

    Ingress protection

    IP23

    Insulation class

    H

    Terminals (Optional)

    6 (12)

    Excitation system

    SHUNT

    Winding pitch

    2/3

    AVR model

    R120

    Overspeed

    2250 R.P.M.

    Voltage regulation

    ± 1 %

    Coolant air flow

    0.06 m3/s

    Certification

    • The complete generating set is type-tested according to ISO 8528-8 standard.

    • Control Panel Specifications

      GMP260MKIII (DSE6110 MKII) panel is an automatic start generating set panel of microprocessor-based design which is capable of interfacing with electronic engine through the can-bus J1939. It is fully configurable by front fascia buttons and PC software as well. If Mains voltage is to be monitored, DSE6020MKII can be offered.

      Circuit Breaker Schneider or ABB, 3 Pole MCB (4 Pole available as Optional)

    • Construction

    • Sheet Fabrication

      CNC shearing & bending

      Paint type

      Heat-treated powder-coated

      Paint application

      Electrostatic corona spraying

      Durability tests

      • IMPACT [EN ISO 6272]
      • Salt spray resistance [ASTM B117-73]
      • Humidity Resistance [ASTM D2247]

      Compliance

      • Panel is compliant with [ISO8528-8]

      • Clearance & Creepage [IEC60355-1]

      • Leakage current & Dielectric strength [IEC60355-1]

      • Protection against electric shock [IEC600 364-4-41]

      Degree of protection

      IP55

      Wire crimping

      • Crimping force up to 20KN

      • Accuracy of 0.01mm

      • Each crimping is checked by Komax CFA+

      Wire coding

      • Wires are coded by wire color and cross-section

      • Wires are coded by printed numbers

      • Wires are coded by printed function of the wire

  • Genset Standard Features

    Assembly:

    Gensets are assembled at Kynn Machinery Factory in compliance with ISO 8528 standard.

    Fabrication:

    – The engine/alternator assembly rests on skid with Anti-vibration mounting pads.

    – The skid is made up of durable sheet metals and beams exceeding “Vibration & Torsion” Resistance Norms.

    – A skid mounted fuel tank is supplied with fuel gauge, filler cap, fuel inlet and outlet hoses.

    – The control panel enclosure is made up of reliable metal sheet.

    Paint:

    -The skid and control panel enclosure are painted with heat-treated and power-coated electrostatic corona spraying.

    – Paints passed durability tests conforming to international quality standards.

    – Impact (EN ISO 6272)

    – Salt Spray Resistance (ASTM B117-73)

    – Humidity Resistance (ASTM D2247)

    Works-Testing:

    – All Gensets are tested prior to dispatch.

    – Test is automatically generated and checked according to ISO8528

    – Test certificate is issued for each Genset

    Equipment:

    – Water cooled Radiator with belt driven blower fan and full guarding

    – Electric starter with solenoid Relay

    – Battery Charging Alternator

    – Energized to run solenoid

    – Replaceable fuel, oil and air filters

    – Heavy duty leads acid battery with matching capacity (Amps & CCA)

    – One loose supplied industrial exhaust silencer – 16 DB noise reduction level.

    – Integral Fuel Tank with 67 L capacity.

    Documentation:

    – User Manual for Operation, Installation and Maintenance guidance

    – Wring Diagram.

    – Test Report

    – Maintenance Schedule

    – Catalogues for Engine, Alternator & AVR

    Genset Optional Features

    Manual & Automatic Transfer Switches,

    Synchronizing & Totalizing Panels

    Fuel water separator

    Water jacket heater

    Oil heater

    Fuel heater

    Battery heater

    Anti-condensation Heater

    Air Shut-off Valve

    Oil Sampler

    Pre-lube Oil Pump

المراجعات

لا توجد مراجعات بعد.

كن أول من يقيم “Kynn Generator KT12.5 – KT13.5S (1500 rpm) powered by Kubota”

لن يتم نشر عنوان بريدك الإلكتروني. الحقول الإلزامية مشار إليها بـ *