View source for Active power filter

{{Short description|Device to perform harmonic elimination}}
'''Active power filters''' ('''APF''') are filters, which can perform the job of [[harmonic]] elimination. Active power filters can be used to filter out harmonics in the [[power system]] which are significantly below the switching frequency of the filter. The active power filters are used to filter out both higher and lower order harmonics in the power system.<ref>{{cite journal |author=He, Jinwei |author2=Beihua Liang |author3=Yun Wei Li |author4=Chengshan Wang|title=Simultaneous Microgrid Voltage and Current Harmonics Compensation Using Coordinated Control of Dual-Interfacing Converters|journal=IEEE Transactions on Power Electronics |date=7 June 2016|volume=32|issue=4|pages=2647–2660|doi=10.1109/TPEL.2016.2576684|s2cid=20100604 }}</ref>

The main difference between active power filters and passive power filters is that APFs mitigate harmonics by injecting active power with the same frequency but with reverse phase to cancel that harmonic, where passive power filters use combinations of [[resistor]]s (R), [[inductor]]s (L) and [[capacitor]]s (C) and does not require an external power source or active components such as transistors. This difference, make it possible for APFs to mitigate a wide range of harmonics.<ref>{{cite journal |author=Jain, S. K. |author2=P. Agrawal |author3=H. O. Gupta |title=Fuzzy logic controlled shunt active power filter for power quality improvement|journal=IEE Proceedings - Electric Power Applications|date=10 December 2002|volume=149|issue=5|pages=317–328|doi=10.1049/ip-epa:20020511}}</ref>

==See also==
*[[Static synchronous series compensator]]
*[[Power conditioner]]
*[[Active filter]]
*[[Line filter]]

==References==
{{reflist}}

[[Category:Filters]]
[[Category:Power engineering]]


{{engineering-stub}}