View source for Cathode ray

{{short description|Beam of electrons observed in vacuum tubes}}
{{More citations needed|date=February 2011}}
[[File:Cyclotron motion smaller view.jpg|thumb|upright=1.2|A beam of cathode rays in a vacuum tube bent into a circle by a [[magnetic field]] generated by a [[Helmholtz coil]]. Cathode rays are normally invisible; in this demonstration [[Teltron tube]], enough gas has been left in the tube for the gas atoms to [[luminescence|luminesce]] when struck by the fast-moving electrons.]]

'''Cathode rays''' or '''electron beams''' ('''e-beam''') are streams of [[electron]]s observed in [[vacuum tube|discharge tube]]s. If an evacuated glass tube is equipped with two [[electrode]]s and a [[voltage]] is applied, glass behind the positive electrode is observed to glow, due to electrons emitted from the [[cathode]] (the electrode connected to the negative terminal of the voltage supply).  They were first observed in 1859 by German physicist [[Julius Plücker]] and [[Johann Wilhelm Hittorf]],<ref>{{Citation
 | first =Andre
 | last =Martin
 | contribution =Cathode Ray Tubes for Industrial and Military Applications
 | editor-last =Hawkes
 | editor-first =Peter
 | title =Advances in Electronics and Electron Physics, Volume 67
 | publisher =Academic Press
 | year =1986
 | isbn =9780080577333
 | page =183
 | quote ="Evidence for the existence of "cathode-rays" was first found by Plücker and Hittorf ..."
}}</ref> and were named in 1876 by [[Eugen Goldstein]] ''Kathodenstrahlen'', or cathode rays.<ref>E. Goldstein (May 4, 1876) [https://books.google.com/books?id=7-caAAAAYAAJ&pg=PA279 "Vorläufige Mittheilungen über elektrische Entladungen in verdünnten Gasen"] (Preliminary communications on electric discharges in rarefied gases), ''Monatsberichte der Königlich Preussischen Akademie der Wissenschaften zu Berlin'' (Monthly Reports of the Royal Prussian Academy of Science in Berlin), 279-295.  From page 286:  "''13.  Das durch die Kathodenstrahlen in der Wand hervorgerufene Phosphorescenzlicht ist höchst selten von gleichförmiger Intensität auf der von ihm bedeckten Fläche, und zeigt oft sehr barocke Muster.''"  (13.  The phosphorescent light that's produced in the wall by the cathode rays is very rarely of uniform intensity on the surface that it covers, and [it] often shows very baroque patterns.)</ref><ref>Joseph F. Keithley ''The story of electrical and magnetic measurements: from 500 B.C. to the 1940s'' John Wiley and Sons, 1999 {{ISBN|0-7803-1193-0}}, page  205</ref> In 1897, British physicist [[J. J. Thomson]] showed that cathode rays were composed of a previously unknown negatively charged particle, which was later named the ''electron''. [[Cathode-ray tube]]s (CRTs) use a focused beam of electrons deflected by electric or magnetic fields to render an image on a screen.

==Description==
[[File:Crookes tube2 diagram.svg|thumb|A diagram showing a [[Crookes tube]] connected to a high voltage supply.  The Maltese cross has no external electrical connection.]]

Cathode rays are so named because they are emitted by the negative electrode, or [[cathode]], in a vacuum tube. To release electrons into the tube, they first must be detached from the [[atom]]s of the cathode. In the early experimental [[cold cathode]] vacuum tubes in which cathode rays were discovered, called [[Crookes tube]]s, this was done by using a high electrical potential of thousands of [[volt]]s between the anode and the cathode to [[ionization|ionize]] the residual gas atoms in the tube.  The positive ions were accelerated by the [[electric field]] toward the cathode, and when they collided with it they knocked electrons out of its surface; these were the cathode rays.   Modern vacuum tubes use [[thermionic emission]], in which the cathode is made of a thin wire [[Electrical filament|filament]] which is heated by a separate [[electric current]] passing through it. The increased random heat motion of the filament knocks electrons out of the surface of the filament, into the evacuated space of the tube.

Since the electrons have a negative charge, they are repelled by the negative cathode and attracted to the positive anode. They travel in parallel lines through the empty tube. The voltage applied between the electrodes accelerates these low mass particles to high velocities. Cathode rays are invisible, but their presence was first detected in these Crookes tubes when they struck the glass wall of the tube, exciting the atoms of the glass coating and causing them to emit light, a glow called [[fluorescence]]. Researchers noticed that objects placed in the tube in front of the cathode could cast a shadow on the glowing wall, and realized that something must be traveling in straight lines from the cathode. After the electrons strike the back of the tube they make their way to the anode, then travel through the anode wire through the power supply and back through the cathode wire to the cathode, so cathode rays carry electric current through the tube.

The current in a beam of cathode rays through a vacuum tube can be controlled by passing it through a metal screen of wires (a [[Control grid|grid]]) between cathode and anode, to which a small negative voltage is applied. The electric field of the wires deflects some of the electrons, preventing them from reaching the anode. The amount of current that gets through to the anode depends on the voltage on the grid. Thus, a small voltage on the grid can be made to control a much larger voltage on the anode. This is the principle used in [[vacuum tube]]s to [[Amplifier|amplify]] electrical signals. The [[triode]] vacuum tube developed between 1907 and 1914 was the first electronic device that could amplify, and is still used in some applications such as [[radio transmitter]]s. High speed beams of cathode rays can also be steered and manipulated by [[electric field]]s created by additional metal plates in the tube to which voltage is applied, or [[magnetic field]]s created by coils of wire ([[electromagnet]]s). These are used in [[cathode-ray tube]]s, found in televisions and computer monitors, and in [[electron microscope]]s.

<gallery widths="150">
  File:Katódsugarak mágneses mezőben(1).jpg|Crookes tube.  The cathode (negative terminal) is on the right.  The anode (positive terminal) is in the base of the tube at bottom. 
  File:Katódsugarak mágneses mezőben(2).jpg|Cathode rays travel from the cathode at the rear of the tube, striking the glass front, making it glow green by [[fluorescence]]. A metal cross in the tube casts a shadow, demonstrating that the rays travel in straight lines.
  File:Katódsugarak mágneses mezőben(3).jpg|A magnet creates a horizontal magnetic field through the neck of the tube, bending the rays up, so the shadow of the cross is higher.
  File:Katódsugarak mágneses mezőben(4).jpg|When the magnet is reversed, it bends the rays down, so the shadow is lower. The pink glow is caused by cathode rays striking residual gas atoms in the tube.
</gallery>

==History==
After the 1654 invention of the [[vacuum pump]] by [[Otto von Guericke]], physicists began to experiment with passing high voltage electricity through [[rarefied air]]. In 1705, it was noted that [[electrostatic generator]] sparks travel a longer distance through low pressure air than through atmospheric pressure air.

===Gas discharge tubes===
[[File:Glow discharge regions.jpg|thumb|upright=1.4|[[Glow discharge]] in a low-pressure tube caused by electric current.]]

In 1838, [[Michael Faraday]] applied a high voltage between two metal [[electrode]]s at either end of a glass tube that had been partially evacuated of air, and noticed a strange light arc with its beginning at the cathode (negative electrode) and its end at the [[anode]] (positive electrode).<ref>Michael Faraday (1838) [https://books.google.com/books?id=ypNDAAAAcAAJ&pg=PA125 "VIII.  Experimental researches in electricity. — Thirteenth series.,"] ''Philosophical Transactions of the Royal Society of London'', '''128''' :  125-168.</ref> In 1857, German physicist and glassblower [[Heinrich Geissler]] sucked even more air out with an improved pump, to a pressure of around 10<sup>−3</sup> [[atmosphere (unit)|atm]] and found that, instead of an arc, a glow filled the tube. The voltage applied between the two electrodes of the tubes, generated by an [[induction coil]], was anywhere between a few [[kilovolt]]s and 100 kV. These were called [[Geissler tube]]s, similar to today's [[neon sign]]s.

The explanation of these effects was that the high voltage accelerated free [[electron]]s and electrically charged [[atom]]s ([[ion]]s)  naturally present in the air of the tube.{{Citation needed|date=June 2012}} At low pressure, there was enough space between the gas atoms that the electrons could accelerate to high enough speeds that when they struck an atom they knocked electrons off of it, creating more positive ions and free electrons, which went on to create more ions and electrons in a chain reaction,{{Citation needed|date=June 2012}} known as a [[glow discharge]].  The positive ions were attracted to the cathode and when they struck it knocked more electrons out of it, which were attracted toward the anode.  Thus the ionized air was electrically conductive and an electric current flowed through the tube.

Geissler tubes  had enough air in them that the electrons could only travel a tiny distance before colliding with an atom. The electrons in these tubes moved in a slow [[diffusion]] process, never gaining much speed, so these tubes didn't produce cathode rays. Instead, they produced a colorful glow discharge (as in a modern [[neon light]]), caused when the electrons struck gas atoms, exciting their orbital electrons to higher energy levels. The electrons released this energy as light. This process is called fluorescence.

===Cathode rays===

By the 1870s, British physicist [[William Crookes]] and others were able to evacuate tubes to a lower pressure, below 10<sup>−6</sup> atm. These were called Crookes tubes. Faraday had been the first to notice a dark space just in front of the cathode, where there was no luminescence. This came to be called the "cathode dark space", "Faraday dark space" or "Crookes dark space". Crookes found that as he pumped more air out of the tubes, the Faraday dark space spread down the tube from the cathode toward the anode, until the tube was totally dark. But at the anode (positive) end of the tube, the glass of the tube itself began to glow.

What was happening was that as more air was pumped from the tube, the electrons knocked out of the cathode when positive ions struck it could travel farther, on average, before they struck a gas atom. By the time the tube was dark, most of the electrons could travel in straight lines from the cathode to the anode end of the tube without a collision. With no obstructions, these low mass particles were accelerated to high velocities by the voltage between the electrodes.  These were the cathode rays.

When they reached the anode end of the tube, they were traveling so fast that, although they were attracted to it, they often flew past the anode and struck the back wall of the tube. When they struck atoms in the glass wall, they excited their orbital electrons to higher [[energy level]]s.  When the electrons returned to their original energy level, they released the energy as light, causing the glass to [[fluoresce]], usually a greenish or bluish color.  Later researchers painted the inside back wall with fluorescent chemicals such as [[zinc sulfide]], to make the glow more visible.

Cathode rays themselves are invisible, but this accidental fluorescence allowed researchers to notice that objects in the tube in front of the cathode, such as the anode, cast sharp-edged shadows on the glowing back wall. In 1869, German physicist [[Johann Hittorf]] was first to realize that something must be traveling in straight lines from the cathode to cast the shadows. [[Eugen Goldstein]] named them ''cathode rays'' (German ''Kathodenstrahlen'').

===Discovery of the electron===
At this time, atoms were the smallest particles known, and were believed to be indivisible. What carried electric currents was a mystery. During the last quarter of the 19th century, many historic experiments were done with Crookes tubes to determine what cathode rays were. There were two theories. Crookes and [[Arthur Schuster]] believed they were particles of "radiant matter," that is, electrically charged atoms. German scientists Eilhard Wiedemann, [[Heinrich Hertz]] and Goldstein believed they were "aether waves", some new form of [[electromagnetic radiation]], and were separate from what carried the electric current through the tube.

The debate was resolved in 1897 when [[J. J. Thomson]] measured the mass of cathode rays, showing they were made of particles, but were around 1800 times lighter than the lightest atom, [[hydrogen]]. Therefore, they were not atoms, but a new particle, the first ''[[subatomic particle|subatomic]]'' particle to be discovered, which he originally called "''corpuscle''" but was later named ''electron'', after particles postulated by [[George Johnstone Stoney]] in 1874. He also showed they were identical with particles given off by [[Photoelectric effect|photoelectric]] and radioactive materials.<ref name="Thomson">{{cite journal
  | last = Thomson
  | first = J. J.
  | title = On bodies smaller than atoms
  | journal = The Popular Science Monthly
  | pages = 323–335
  | publisher = Bonnier Corp.
  |date=August 1901| url = https://books.google.com/books?id=3CMDAAAAMBAJ&pg=PA323
  | access-date = 2009-06-21}}</ref> It was quickly recognized that they are the particles that carry electric currents in metal wires, and carry the negative electric charge of the atom.

Thomson was given the 1906 [[Nobel Prize in Physics]] for this work. [[Philipp Lenard]] also contributed a great deal to cathode-ray theory, winning the Nobel Prize in 1905 for his research on cathode rays and their properties.

===Vacuum tubes===
The gas ionization (or [[cold cathode]]) method of producing cathode rays used in Crookes tubes was unreliable, because it depended on the pressure of the residual air in the tube. Over time, the air was absorbed by the walls of the tube, and it stopped working.

A more reliable and controllable method of producing cathode rays was investigated by Hittorf and Goldstein,{{citation needed|date=November 2011}} and rediscovered by [[Thomas Edison]] in 1880. A cathode made of a wire filament heated red hot by a separate current passing through it would release electrons into the tube by a process called [[thermionic emission]]. The first true electronic vacuum tubes, invented in 1904 by [[John Ambrose Fleming]], used this [[hot cathode]] technique, and they superseded Crookes tubes. These tubes didn't need gas in them to work, so they were evacuated to a lower pressure, around 10<sup>−9</sup> atm (10<sup>−4</sup> Pa). The ionization method of creating cathode rays used in Crookes tubes is today only used in a few specialized [[gas discharge tube]]s such as [[krytron]]s.

In 1906, [[Lee De Forest]] found that a small voltage on a grid of metal wires between the cathode and anode could control a current in a beam of cathode rays passing through a vacuum tube. His invention, called the [[triode]], was the first device that could [[amplifier|amplify]] electric signals, and revolutionized electrical technology, creating the new field of ''[[electronics]]''. Vacuum tubes made [[radio broadcasting|radio]] and [[television broadcasting]] possible, as well as [[radar]], talking movies, audio recording, and long-distance telephone service, and were the foundation of consumer electronic devices until the 1960s, when the [[transistor]] brought the era of vacuum tubes to a close.

Cathode rays are now usually called electron beams. The technology of manipulating electron beams pioneered in these early tubes was applied practically in the design of vacuum tubes, particularly in the invention of the cathode-ray tube (CRT) by [[Ferdinand Braun]] in 1897, which was used in [[television set]]s and [[oscilloscope]]s.  Today, electron beams are employed in sophisticated devices such as electron microscopes, [[electron beam lithography]] and [[particle accelerator]]s.

==Properties==
Like a wave, cathode rays travel in straight lines, and produce a shadow when obstructed by objects. [[Ernest Rutherford]] demonstrated that rays could pass through thin metal foils, behavior expected of a particle. These conflicting properties caused disruptions when trying to classify it as a wave or particle. Crookes insisted it was a particle, while Hertz maintained it was a wave. The debate was resolved when an electric field was used to deflect the rays by J. J. Thomson. This was evidence that the beams were composed of particles  because scientists knew it was impossible to deflect electromagnetic waves with an electric field. These can also create mechanical effects, fluorescence, etc.

[[Louis de Broglie]] later (1924) suggested in his doctoral dissertation that electrons are like photons and can act as [[Matter wave|waves]]. The wave-like behaviour of cathode rays was later directly demonstrated using reflection from a nickel surface by [[Davisson–Germer experiment|Davisson and Germer]],<ref>{{Cite journal |last1=Davisson |first1=C. |last2=Germer |first2=L. H. |date=1927 |title=Diffraction of Electrons by a Crystal of Nickel |journal=Physical Review |volume=30 |issue=6 |pages=705–740 |doi=10.1103/PhysRev.30.705|doi-access=free }}</ref> and transmission through celluloid thin films and later metal films by [[George Paget Thomson]] and Alexander Reid<ref>{{Cite journal |last1=Thomson |first1=G. P. |last2=Reid |first2=A. |date=1927 |title=Diffraction of Cathode Rays by a Thin Film |journal=Nature |language=en |volume=119 |issue=3007 |pages=890 |doi=10.1038/119890a0 |issn=1476-4687|doi-access=free }}</ref> in 1927. (Alexander Reid, who was Thomson's graduate student, performed the first experiments but he died soon after in a motorcycle accident<ref>{{Cite journal |last=Navarro |first=Jaume |date=2010 |title=Electron diffraction chez Thomson: early responses to quantum physics in Britain |url=https://www.cambridge.org/core/product/identifier/S0007087410000026/type/journal_article |journal=The British Journal for the History of Science |language=en |volume=43 |issue=2 |pages=245–275 |doi=10.1017/S0007087410000026 |issn=0007-0874}}</ref> and is rarely mentioned.)

==See also==
{{col div|colwidth=30em}}
*[[Beta particle|β (beta) particles]]
*[[Electron beam processing]]
*[[Electron diffraction]]
*[[Electron microscope]]
*[[Electron beam melting]]
*[[Electron beam welding]]
*[[Electron beam technology]]
*[[Electron gun]]
*[[Electron irradiation]]
*[[Ionizing radiation]]
*[[Particle accelerator]]
*[[Sterilisation (microbiology)]]

{{colend}}

==References==
{{Reflist}}
* General Chemistry (structure and properties of matter) by Aruna Bandara (2010)

==External links==
*[https://web.archive.org/web/20140701141404/http://www.crtsite.com/page3.html The Cathode Ray Tube site]
*[https://www.youtube.com/watch?v=Xt7ZWEDZ_GI Crookes tube with maltese cross operating]

{{Authority control}}

{{DEFAULTSORT:Cathode Ray}}
[[Category:Electromagnetism]]
[[Category:Electron beam]]
[[Category:Articles containing video clips]]