View source for Cheng cycle

{{thermodynamics|cTopic=Processes and Cycles}}
The '''Cheng cycle''' is a [[thermodynamic cycle]] which uses a combination of two working fluids, one gas and one steam.  It can therefore be considered a combination of the [[Brayton cycle]] and the [[Rankine cycle]]. It was named for Dr. Dah Yu Cheng.<ref name="turboexpo" />

The company founded by Dr. Cheng has developed systems in partnership with both GM and GE turbine manufacturers to take advantage of the Cheng cycle by modification of existing turbine designs before construction. The Cheng cycle involves the heated [[exhaust gas]] from the turbine being used to make steam in a heat recovery steam generator (HRSG).<ref>Penning, F. M. and de Lange, F. M. (1995) Steam Injection: analysis of a typical application ''Applied Thermal Engineering'' Vol. 16, No. 2, pp. 115 125</ref> The steam so produced is injected into the gas turbine's combustion chamber to increase power output.<ref>De Paepe, M. and E. Dick (2001) Technological and economical analysis of water recovery in steam injected gas turbines, ''Applied Thermal Engineering'', Volume 21, Issue 2, January 2001, Pages 135–156</ref> The process can be thought of as a parallel combination of the gas turbine [[Brayton cycle]] and a steam turbine [[Rankine cycle]].<ref>Stadler, F. and U. Schneider, (1997) ELIN Cheng Cycle, Elin Energieversorgung GmbH, 1997</ref><ref>Motz, D.A. (1987) The Cheng Cycle: principles and applications, ''Ass. Energy Engng, 8th World Energy Engng Conf., Atlanta, USA</ref> The cycle was invented by Prof. Dah Yu Cheng of the [[University of Santa Clara]] who patented it in 1976.<ref>[https://books.google.com/books?id=PKBKP6XWCq4C&dq=%22Cheng+cycle%22&pg=PA316 Cen, Ke-fa Yong Chi, Jianhua Yan (2007) ''Challenges of Power Engineering and Environment: Proceedings of the International Conference on Power Engineering'', Springer] (Accessed August 2012)</ref><ref name="turboexpo">Cheng, D.Y. and A.L.C. Nelson (2002) ''Chronological development of the Cheng cycle steam injected gas turbine during the past 25 years''. in: Anon (Ed.), ''Proceedings of ASME Turbo Expo'' 2002, Amsterdam, ASME Paper No. GT-2002-30119 (2002), pp. 421–428</ref>

A fully Cheng Cycle design Gas/Steam two fluid flow turbine can achieve a theoretical [[thermal efficiency]] of 60% matching or even exceeding many traditional Combined Cycle Gas Turbines that keep the steam [[Rankine Cycle]] and gas [[Brayton Cycle]] as separate loops.<ref name="turboexpo" />

==See also==
* [[Combined cycle]]
* [[Brayton cycle]]
* [[Rankine cycle]]
* [[Cogeneration]]

==References==
{{Reflist|30em}}

[[Category:Power engineering]]
[[Category:Thermodynamic cycles]]
{{thermodynamics-stub}}