View source for Thermal effusivity

{{Short description|Ability of a material to exchange thermal energy with surroundings}}
[[File:EffusivitySensor.jpg|alt=Thermal Effusivity Sensor|thumb|Thermal effusivity sensor typically used in the direct measurement of materials.]]

In [[thermodynamics]], a material's '''thermal effusivity''', also known as '''thermal responsivity''', is a measure of its ability to exchange [[thermal energy]] with its surroundings. It is defined as the square root of the product of the material's [[thermal conductivity]] (<math>\lambda</math>) and its [[volumetric heat capacity]] (<math>\rho c_p</math>) or as the ratio of thermal conductivity to the square root of thermal diffusivity (<math>\alpha</math>).<ref>[https://web.archive.org/web/20071014012424/http://www.evitherm.org/default.asp?ID=277 A reference defining various thermal properties]</ref><ref name=dante>{{cite book |last=Dante |first=Roberto C. |title=Handbook of Friction Materials and Their Applications |year=2016 |publisher=Elsevier |doi=10.1016/B978-0-08-100619-1.00009-2 |pages=123–134}}</ref><ref name=carjae>{{cite book |last1=Carslaw |first1=H.S. |last2=Jaeger |first2=J.C. |title=Conduction of Heat in Solids |publisher=Clarendon Press, Oxford |year=1959 |isbn=978-0-19-853368-9 |url=https://books.google.com/books?id=ySRRAAAAMAAJ}}</ref>
:<math>e = \frac{\lambda}{\sqrt{\alpha}}=\sqrt{\left(\lambda\rho c_p\right)}</math>
The [[International System of Units|SI units]] for thermal effusivity are <math>{\rm W} \sqrt{{\rm s}} / ({\rm m^2 K})</math>, or, equivalently, <math>{\rm J} / ( {\rm m^2 K}\sqrt{{\rm s}})</math>.
Thermal effusivity is a good approximation for the material's ''[[thermal inertia]]'' for a semi-infinite rigid body where heat transfer is dominated by the diffusive process of conduction only.

Thermal effusivity is a parameter that emerges upon applying solutions of the [[heat equation]] to heat flow through a thin surface-like region.<ref name=carjae />  It becomes particularly useful when the region is selected adjacent to a material's actual surface.  Knowing the effusivity and [[thermodynamic equilibrium#Uniform temperature|equilibrium temperature]] of each of two material bodies then enables an estimate of their interface temperature <math>T_m</math> when placed into [[thermal contact]].<ref name=baehr>{{Cite book
  |first1=H.D.  |last1=Baehr
  |first2=K.  |last2=Stephan
  |title=Wärme- und Stoffübertragung 4. Auflage
  |publisher=Springer
  |year=2004
  |page=172
  |isbn=978-3-662-10834-5
  |doi=10.1007/978-3-662-10833-8
}}</ref>
If <math>T_1</math> and <math>T_2</math> are the temperature of the two bodies, then upon contact, the temperature of the contact interface (assumed to be a smooth surface) becomes<ref>Rajamanickam, P. (2020). Thermal explosion characteristics of a gelled hypergolic droplet. Journal of Propulsion and Power, 36(2), 264-270.</ref> 
:<math>T_m = \frac{e_1 T_1 + e_2 T_2}{e_1+e_2}</math>
Specialty sensors have also been developed based on this relationship to measure effusivity.  

Thermal effusivity and [[thermal diffusivity]] are related quantities; respectively a product versus a ratio of a material's fundamental transport and storage properties.  The diffusivity appears explicitly in the heat equation, which is an energy [[conservation equation]], and measures the speed at which [[thermal equilibrium]] can be reached by a body.<ref name=dante />  By contrast a body's effusivity (also sometimes called inertia, accumulation, responsiveness etc.) is its ability to resist a temperature change when subjected to a time-periodic, or similarly perturbative, [[forcing function (differential equations)|forcing function]].<ref name=veto>{{cite journal |url=https://www.hou.usra.edu/meetings/lpsc2015/pdf/2914.pdf |last1=Veto |first1=M.S. |last2=Christensen |first2=P.R. |title=Mathematical Theory of Thermal Inertia Revisited |journal=46th Lunar and Planetary Science Conference |year=2015}}</ref><ref>{{Cite journal
  |last=Williams  |first=F. A.
  |year=2009 
  |title=Simplified theory for ignition times of hypergolic gelled propellants. 
  |journal=[[Journal of Propulsion and Power|J. Propulsion and Power]]
  |volume=25  |issue=6
  |pages=1354–1357
  |doi=10.2514/1.46531
 }}</ref>

== Applications ==

=== Temperature at a contact surface ===

If two semi-infinite{{efn-lr|i.e. their thermal capacity is sufficiently large that their temperatures will not change measurably owing to this heat transfer}} bodies initially at temperatures <math>T_1</math> and <math>T_2</math> are brought in perfect thermal contact, the temperature at the contact surface <math>T_m</math> will be a [[weighted mean]] based on their relative effusivities.<ref name=baehr /> This relationship can be demonstrated with a very simple "control volume" back-of-the-envelope calculation:

Consider the following 1D heat conduction problem. Region 1 is material 1, initially at uniform temperature <math>T_1</math>, and region 2 is material 2, initially at uniform temperature <math>T_2</math>. Given some period of time <math>\Delta t</math> after being brought into contact, heat will have diffused across the boundary between the two materials. The [[thermal diffusivity]] of a material is <math>\alpha = \lambda/(\rho c_p)</math>. From the [[heat equation]] (or [[diffusion equation]]), a characteristic diffusion length <math> \Delta x_1 </math> into material 1 is
:<math>\Delta x_1 \simeq \sqrt{\alpha_1 \cdot \Delta t}</math>, where <math>\alpha_1 = \lambda_1 / (\rho c_p)_1 </math>.
Similarly, a characteristic diffusion length <math> \Delta x_2 </math> into material 2 is
:<math>\Delta x_2 \simeq \sqrt{\alpha_2 \cdot \Delta t}</math>, where <math>\alpha_2 = \lambda_2 / (\rho c_p)_2 </math>. 
Assume that the temperature within the characteristic diffusion length on either side of the boundary between the two materials is uniformly at the contact temperature <math> T_m </math> (this is the essence of a control-volume approach). Conservation of energy dictates that 
:<math> \Delta x_1 (\rho c_p)_1 (T_1 - T_m) = \Delta x_2 (\rho c_p)_2 ( T_m - T_2 ) </math>. 
Substitution of the expressions above for <math>\Delta x_1</math> and <math> \Delta x_2 </math> and elimination of <math> \Delta t </math> yields an expression for the contact temperature. 
:<math>T_m = T_1 + \left(T_2 - T_1\right)\frac{e_2}{e_2 + e_1}=\frac{e_1 T_1 + e_2 T_2}{e_1+e_2}</math>
This expression is valid for all times for semi-infinite bodies in perfect thermal contact. It is also a good first guess for the initial contact temperature for finite bodies.

Even though the underlying heat equation is parabolic and not hyperbolic (i.e. it does not support waves), if we in some rough sense allow ourselves to think of a temperature jump as two materials are brought into contact as a "signal", then the transmission of the temperature signal from 1 to 2 is <math> e_1 / (e_1 + e_2) </math>. Clearly, this analogy must be used with caution; among other caveats, it only applies in a transient sense, to media which are large enough (or time scales short enough) to be considered effectively infinite in extent.

=== Heat sensed by human skin ===

An application of thermal effusivity is the quasi-qualitative measurement of coolness or warmth "feel" of materials, also known as [[thermoception]].  It is a particularly important metric for textiles, fabrics, and building materials.   Rather than temperature,  skin [[thermoreceptor]]s are highly responsive to the inward or outward flow of heat.  Thus, despite having similar temperatures near [[room temperature]], a high effusivity metal object is detected as cool while a low effusivity fabric is sensed as being warmer.<ref name=dante />

=== Diathermal walls ===

For a [[diathermal wall]] having a stepped "constant heat" [[boundary condition]] imposed abruptly onto one side, thermal effusivity <math>e</math> performs nearly the same role in limiting the initial ''dynamic'' thermal response (rigorously, during times less than the heat diffusion time to transit the wall) as the insulation [[U-factor]] <math>U</math> plays in defining the ''static'' temperature obtained by the side after a long time.  A dynamic U-factor <math>U_{dyn}</math> and a diffusion time <math>t_L</math> for the wall of thickness <math>L</math>, thermal diffusivity <math>\alpha</math> and thermal conductivity <math>\lambda</math> are specified by:<ref>{{cite journal |last1=van der Maas |first1=J. |last2=Maldonado |first2=E. |title=A New Thermal Inertia Model Based on Effusivity |journal=International Journal of Solar Energy |url=https://www.researchgate.net/profile/Claude-Alain-Roulet/post/What_is_Thermal_Mass_in_Passive_Solar_Building/attachment/62388d0119eb97629d3df771/AS%3A1136077033218052%401647873280997/download/ThermalInertia.pdf |volume=19 |issue=1-3 |year=1997 |pages=131-160 |doi=10.1080/01425919708914334 |doi-access=}}</ref>
:<math>U_{dyn}(t) = e\sqrt{\frac{\pi}{4t}} \approx \frac{e}{\sqrt{t}}</math> ; during&nbsp;<math>t < t_{L} = \frac{L^2}{4\pi\alpha}=\frac{e^2}{4\pi U^2}</math> where&nbsp;<math>e = \frac{\lambda}{\sqrt{\alpha}}</math> and&nbsp;<math>U = \frac{\lambda}{L}.</math>

=== Planetary science ===

For planetary surfaces, [[Volumetric heat capacity#Thermal inertia|thermal inertia]] is a key phenomenon controlling the [[diurnal cycle|diurnal]] and [[seasonality|seasonal]] surface temperature variations.  The thermal inertia of a [[terrestrial  planet]] such as Mars can be approximated from the thermal effusivity of its near-surface geologic materials. In [[remote sensing]] applications, thermal inertia represents a complex combination of particle size, rock abundance, bedrock outcropping and the degree of induration (i.e. thickness and hardness).<ref>{{cite journal |last=Christensen |first=P.R. |display-authors=etal |title=Mars Global Surveyor Thermal Emission Spectrometer experiment: Investigation description and surface science results |url=https://www.mars.asu.edu/christensen/docs/christensen_tesreview_2001.pdf |journal=Journal of Geophysical Research: Planets |volume=106 |number=E10 |date=25 October 2001 |pages=23823–23871 |doi=10.1029/2000JE001370 |bibcode=2001JGR...10623823C |doi-access=}}</ref>

A rough approximation to thermal inertia is sometimes obtained from the amplitude of the diurnal temperature curve (i.e. maximum minus minimum surface temperature).<ref name=veto /> The temperature of a material with low thermal effusivity changes significantly during the day, while the temperature of a material with high thermal effusivity does not change as drastically. Deriving and understanding the thermal inertia of the surface can help to recognize small-scale features of that surface. In conjunction with other data, thermal inertia can help to characterize surface materials and the geologic processes responsible for forming these materials.<ref>{{cite journal |last=Price |first=John C. |title=Thermal Mapping: A New View of the Earth |journal=Journal of Geophysical Research |volume=82 |issue=18 |pages=2582–2590 |date=20 June 1977 |doi=10.1029/JC082i018p02582 |doi-access=}}</ref>

On Earth, thermal inertia of the global ocean is a major factor influencing [[climate inertia]].  Ocean thermal inertia is much greater than land inertia because of [[convective heat transfer]], especially through the upper [[mixed layer]].<ref>{{cite web |url=https://earthobservatory.nasa.gov/features/HeatBucket/heatbucket.php |title=Earth's Big Heat Bucket |publisher=NASA Earth Observatory |author=Michon Scott |date=24 April 2006}}</ref>  The thermal effusivities of stagnant and frozen water underestimate the vast thermal inertia of the dynamic and multi-layered ocean.<ref>{{cite web |url=https://scied.ucar.edu/learning-zone/earth-system/climate-system/transfer-and-storage-heat-oceans |title=Transfer and Storage of Heat in the Oceans |publisher=UCAR Center for Science Education |accessdate=3 March 2023}}</ref>

=== Thermographic inspection ===
{{main|Thermographic inspection}}

Thermographic inspection encompasses a variety of [[nondestructive testing]] methods that utilize the wave-like characteristics of heat propagation through a transfer medium.   These methods include ''Pulse-echo [[thermography]]'' and ''thermal wave imaging''.   Thermal effusivity and diffusivity of the materials being inspected can serve to simplify the mathematical modelling of, and thus interpretation of results from these techniques.<ref>{{cite journal |last1=Sharma |first1=Anshul |last2=Mulaveesala |first2=Ravibabu |last3=Arora |first3=Vanita |title=Novel Analytical Approach for Estimation of Thermal Diffusivity and Effusivity for Detection of Osteoporosis |url=https://www.researchgate.net/publication/339248506_Novel_Analytical_Approach_for_Estimation_of_Thermal_Diffusivity_and_Effusivity_for_Detection_of_Osteoporosis |journal=IEEE Sensors Journal |volume=20 |issue=11 |date=1 June 2020 |pages=6046–6054 |doi=10.1109/JSEN.2020.2973233|bibcode=2020ISenJ..20.6046S |s2cid=213986857 }}</ref>

== Measurement interpretation ==

When a material is measured from the surface with short test times by any transient method or instrument, the [[heat transfer]] mechanisms generally include conduction, convection and radiation.  Conduction may dominate the thermal behavior of solid bodies near and below room temperature.  

A [[thermal contact resistance|contact resistance]] (due to surface roughness, oxidation, impurities, etc.) between the sensor and sample may also exist.   Evaluations with high heat dissipation (driven by large temperature differentials) can likewise be influenced by an [[interfacial thermal resistance]].  All of these factors, along with the body's finite dimensions, must be considered during execution of measurements and interpretation of results.
{{clear}}

== Thermal effusivity of selected materials and substances ==

This is a list of the thermal effusivity of some common substances, evaluated at room temperature unless otherwise indicated.
{{clear}}

{| class="wikitable sortable" style="text-align:center; font-size:0.9em; width:450px;"
|+List of thermal effusivities
! scope="col" | Material
! scope="col" | Thermal effusivity <br />( <math>{\rm kJ} / ( {\rm m^2 K}\sqrt{{\rm s}})</math> )
! scope="col" class="unsortable" | References 
|-
| Air * {{Anchor|teair}}|| 0.006 || <ref name="eleccool">{{cite web |url=https://www.electronics-cooling.com/2007/11/thermal-effusivity/ |title=Materials Data |author=Clemens J.M. Lasance |website=electronics-cooling.com |date=November 2007 }}</ref> <ref name="thermtst">{{cite web |url=https://thermtest.com/thermal-resources/materials-database |title=Materials Thermal Properties Database |website=thermtest.com |accessdate=17 January 2023}}</ref>
|-
| Wool || 0.07 || <ref name="eleccool" />
|-
| Cork || 0.1 || <ref name="thermtst" />
|-
| Balsa Wood || 0.26 || <ref name="thermtst" /> <ref name="cibse">{{cite web |url=https://www.cibsejournal.com/cpd/modules/2013-01/ |title=Simple thermal analysis for buildings |author=Tim Dwyer |website=cibsejournal.com |date=January 2013 }}</ref> 
|-
| Paper || 0.3 || <ref name="thermtst" />
|-
| Pine Wood || 0.36-0.66 || <ref name="thermtst" />
|-
| Plasterboard || 0.38 || <ref name="cibse" />
|-
| Soil || 0.5-2.6 || <ref name="thermtst" />
|-
| Concrete cinderblock || 0.59 || <ref name="thermtst" />
|-
| PVC - polyvinyl chloride || 0.6 || <ref name="eleccool" /> <ref name="thermtst" />
|-
| Sand (dry) || 0.63 || <ref name="thermtst" />
|-
| Brick || 1.0-1.6 || <ref name="cibse" />
|-
| Skin || 1.0 || <ref name="eleccool" />
|-
| Quartz - fused silica || 1.5 || <ref name="eleccool" /> <ref name="thermtst" />
|-
| Water * {{Anchor|tewat}}|| 1.6 || <ref name="eleccool" /> <ref name="thermtst" />
|-
| Concrete (dense) || 2.0 || <ref name="cibse" />
|-
| Granite || 2.0-3.0 || <ref name="thermtst" />
|-
| Ice - solid H<sub>2</sub>O || 2.8 || <ref name="eleccool" /> <ref name="thermtst" />
|-
| Silicon || 14.4 || <ref name="eleccool" /> <ref name="thermtst" />
|-
| Iron || 15.9 || <ref name="eleccool" /> <ref name="thermtst" />
|-
| Aluminum || 23.7 || <ref name="eleccool" /> <ref name="thermtst" />
|-
| Copper || 36.9 || <ref name="eleccool" /> <ref name="thermtst" />
|}
<small>(*)  minimal convection</small>

== See also ==
* [[Thermal contact conductance]]
* [[Thermal diffusivity]]
* [[Heat equation]]
* [[Heat capacity]]

==References==
{{Notelist-lr}}

{{Reflist}}

==External links==
* {{Cite web
  |url=http://hyperphysics.phy-astr.gsu.edu/hbase/thermo/heatra.html 
  |title=Thermal heat transfer
  |website=HyperPhysics
}}

[[Category:Thermodynamic properties]]
[[Category:Physical quantities]]
[[Category:Heat conduction]]
[[Category:Materials testing]]