File:3D printing of PLA-CNT microcoil.webm

From KYNNpedia

3D_printing_of_PLA-CNT_microcoil.webm ‎(file size: 4.12 MB, MIME type: video/webm)

This file is from Wikimedia Commons and may be used by other projects. The description on its file description page there is shown below.

Description 3D printing of a solenoid microcoil using a conductive mixture of polylactide and carbon nanotubes
Date
Source [1] (supplemental information)
Author Shuang-zhuang Guo et al
Permission
(Reusing this file)		 [2]
w:en:Creative Commons
attribution
This file is licensed under the Creative Commons Attribution 4.0 International license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

media type

video/webm

checksum

099c2d958eb6b0c6fa8016af594286d10ef829ed

determination method or standard: SHA-1

data size

4,324,306 byte

duration

43.238 second

height

720 pixel

width

1,280 pixel

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current03:25, 5 October 2015 (4.12 MB)wikimediacommons>Materialscientist{{Information |Description=3D printing of a solenoid microcoil using a conductive mixture of polylactide and carbon nanotubes |Source=[http://pubs.rsc.org/en/Content/ArticleLanding/2015/NR/c5nr00278h#!divAbstract] (supplemental information) |Date=2015...

The following page uses this file:

Retrieved from "https://kynnco.com:443/kynnpedia/index.php?title=File:3D_printing_of_PLA-CNT_microcoil.webm"