File:Left-handed metamaterial array configuration.jpg
From KYNNpedia
No higher resolution available.
Left-handed_metamaterial_array_configuration.jpg (425 × 308 pixels, file size: 107 KB, MIME type: image/jpeg)
Summary
| Description |
English: Figure 3 (Long description) Left-handed metamaterial array configuration consisting of copper split-ring resonators and wires mounted on interlocking sheets of fiberglass circuit board. A split-ring resonator consists of an inner square with a split on one side embedded in an outer square with a split on the other side. The split-ring resonators are on the front and right surfaces of the square grid and the single vertical wires are on the back and left surfaces. References:
|
| Date | |
| Source | NASA Glenn Research Center |
| Author | Cynthia.L.Dreibelbis@nasa.gov (point of contact) |
| Permission (Reusing this file) |
Public Domain |
Licensing
|
This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.) |  |
 |
Warnings:
|
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 16:59, 2 August 2009 | | 425 × 308 (107 KB) | wikimediacommons>Ti-30X | {{Information |Description={{en|1=Figure 3 (Long description) [http://www.grc.nasa.gov/WWW/RT/2003/5000/5620wilson.html Left-handed metamaterial array] configuration consisting of copper split-ring resonators and wires mounted on interlocking sheets of fi |
File usage
The following page uses this file:
