This file is from Wikimedia Commons and may be used by other projects.
The description on its file description page there is shown below.
Summary
DescriptionRadioconducteur 05.jpg
Français : radioconducteur à billes
English: A 'ball' coherer, an antique radio wave detector used in the first radio receivers around 1900. This unusual type, invented by Edouard Branly in 1899, used a row of lightly touching steel balls in a tube between two electrodes. A radio wave from an antenna is applied to the end electrodes, directly across the balls. When a radio signal arrives, it causes the DC resistance of the contacts between the balls to decrease. This triggers a battery-powered circuit, also connected across the electrodes, to make a "click" sound or a mark on a paper tape to record the radio message. The balls must be "decohered", reset to the high resistance state, by tapping them mechanically after every signal. Branly found that radio waves from a nearby electric spark reduced the resistance of the device from 2000 to 100 ohms. The sensitivity can be varied by tilting the tube to different angles.
I, the copyright holder of this work, hereby publish it under the following licenses:
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.