Search results

...g rates equals limited competition. Thus measuring and assessing switching rates is necessary in order to have a correct impression of the energy markets. T ...

...method (AOIR) an alternative method for measuring the oxygen transmission rates (OTR) of whole packages [[Category:Temporal rates]] ...

[[Category:Temporal rates|Penetration]] ...

...ations or revolutions per unit of time. It is common to express rotational rates in revolutions per minute (RPM). [[Category:Temporal rates]] ...

...itoring these refractive changes over time characteristics such as kinetic rates and affinity constants of the analyte-target binding, or analyte concentrat ...th respect to surface refractive index can be achieved even at acquisition rates above 10Hz. Since the interference is created on chip and not through free- ...

...ure. For a given outlet pressure <math>\scriptstyle p_{21} \,</math>, flow rates change depending on the inlet pressure <math>\scriptstyle p_{01} \,</math> ...s not represent absolute flow rates and pressures, but rather maximum flow rates and pressures, with the maximum values of the diagram having in this case t ...

...y, nor are allowed to sell energy directly to you. They simply present the rates of a wholesaler, or supplier. Energy brokers typically do not charge up front fees to provide rates. If an entity purchases energy through a broker, the broker's fee or commis ...

...w rate. [[Bernoulli's principle]] is applied to calculate the chosen flow rates chosen by the user or automated by a computer. Computers and PAC systems a ...

...gy because its performance characteristics such as typing speeds and error rates have been established in various describable situations.<ref name=":0" /> A ...

...audio segments to a targeted audience in the hopes of increasing response rates. Several commercial vendors have evolved and offer technology platforms to ...

...ely low. Weir type skimmers are capable of very high oil and water removal rates. ASTM F2709 standard establishes the test procedure for determining oil rec ...that removes floating oil regardless of the oil layer thickness. Recovery rates depend on the surface area of the oleophilic material that enters and exits ...

...tion, the concentrations, temperatures, species compositions, and reaction rates are changing with time until operation reaches its nominal process variable ...

...tal techniques that in some designs can measure extremely low transmission rates. Special care has to be taken in measuring porous substances such as fabric ...16 (approximately 1/15) of the value of g/m²/day units. Typical rates in aluminium foil laminates may be as low as 0.001 g/m²/day, whe ...

...for long periods, thereby imposing higher costs on the system. Electrical rates are designed so that customers with high load factor are charged less overa ...

=={{anchor|Cubic foot per second}}Cubic foot per second and related flow rates== ...

...ggregate sectoral technological change and to the difference in the growth rates across sectors.<ref name=book /> ...oduction factors. In any case the rates of real growth do not exceed the rates of potential growth, given as functions of time ...

...pport [[Ethernet]] tunneling. GMSL2 supports 187.5Mbit/s or 1.5Gbit/s data rates on the reverse channel.<ref name="witt" /> ...

...ice to operate. Plotted on independent axes (voltage, temperature, refresh rates), the range of working values will enclose a three-dimensional, usually odd ...

* Bits 27, 43, and 59 differ between 25 frame/s time code, and other frame rates (30, 29.97, or 24).{{r|BR.780-2|p=9}}<ref>{{Citation |mode=cs1 |title=India ** "Polarity correction bit" (bit 59 at 25 frame/s, bit 27 at other rates): this bit is chosen to provide an even number of 0 bits in the whole frame ...

...opulation characteristics; C = Building Factors and RFR = Residential Fire Rates.</ref> ...