Buzzer

From KYNNpedia
Revision as of 20:55, 23 August 2023 by 103.21.175.72 (talk) (→‎References)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

A buzzer or beeper is an audio signaling device,<ref>"buzzer - definition of buzzer by The Free Dictionary". Retrieved 22 May 2015.</ref> which may be mechanical, electromechanical, or piezoelectric (piezo for short). Typical uses of buzzers and beepers include alarm devices, timers, train and confirmation of user input such as a mouse click or keystroke.

History

Electromechanical

The electric buzzer was invented in 1831 by Joseph Henry. They were mainly used in early doorbells until they were phased out in the early 1930s in favor of musical chimes, which had a softer tone.<ref>"The History of the Doorbell by 1800doorbell.com". www.1800doorbell.com. Retrieved 2015-07-12.</ref>

Piezoelectric

Piezoelectric buzzers, or piezo buzzers, as they are sometimes called, were invented by Japanese manufacturers and fitted into a wide array of products during the 1970s to 1980s. This advancement mainly came about because of cooperative efforts by Japanese manufacturing companies. In 1951, they established the Barium Titanate Application Research Committee, which allowed the companies to be "competitively cooperative" and bring about several piezoelectric innovations and inventions.<ref>"Piezo Systems: History of Piezoelectricity". www.piezo.com. Archived from the original on 2013-10-11. Retrieved 2015-07-12.</ref>

Types

Electromechanical

Early devices were based on an electromechanical system identical to an electric bell without the metal gong. Similarly, a relay may be connected to interrupt its own actuating current, causing the contacts to buzz (the contacts buzz at line frequency if powered by alternating current) Often these units were anchored to a wall or ceiling to use it as a sounding board. The word "buzzer" comes from the rasping noise that electromechanical buzzers made.

Mechanical

A joy buzzer is an example of a purely mechanical buzzer and they require drivers. Other examples of them are doorbells.

Piezoelectric

Piezoelectric disk beeper

A piezoelectric element may be driven by an oscillating electronic circuit or other audio signal source, driven with a piezoelectric audio amplifier. Sounds commonly used to indicate that a button has been pressed are a click, a ring or a beep.

Interior of a readymade loudspeaker, showing a piezoelectric-disk-beeper (With 3 electrodes ... including 1 feedback-electrode ( the central, small electrode joined with red wire in this photo), and an oscillator to self-drive the buzzer.

A piezoelectric buzzer/beeper also depends on acoustic cavity resonance or Helmholtz resonance to produce an audible beep.<ref>"Design of a Helmholtz Chamber - PUI Audio | A Projects Unlimited Company located in Dayton, Ohio".</ref>

Modern applications

While technological advancements have caused buzzers to be impractical and undesirable[citation needed], there are still instances in which buzzers and similar circuits may be used. Present day applications include:

See also

References

<references group="" responsive="1"></references>

Lua error in Module:Authority_control at line 181: attempt to index field 'wikibase' (a nil value).