Colorimetry

From KYNNpedia
Revision as of 20:44, 23 December 2023 by imported>Drahreg01 (→‎Further reading: Why this order?)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Colorimetry is "the science and technology used to quantify and describe physically the human color perception".<ref>Ohno, Yoshi (16 October 2000). CIE Fundamentals for Color Measurements (PDF). IS&T NIP16 Intl. Conf. on Digital Printing Technologies. pp. 540–45. Archived from the original (PDF) on 15 May 2009. Retrieved 18 June 2009.</ref> It is similar to spectrophotometry, but is distinguished by its interest in reducing spectra to the physical correlates of color perception, most often the CIE 1931 XYZ color space tristimulus values and related quantities.<ref>Gaurav Sharma (2002). Digital Color Imaging Handbook. CRC Press. pp. 15–17. ISBN 978-0-8493-0900-7.</ref>

History

The Duboscq colorimeter was invented by Jules Duboscq in 1870. <ref>Cal Poly Humboldthumboldt.edu Archived 8 May 2013 at the Wayback Machine</ref>

Instruments

Colorimetric equipment is similar to that used in spectrophotometry. Some related equipment is also mentioned for completeness.

Two spectral reflectance curves. The object in question reflects light with shorter wavelengths while absorbing those in others, lending it a blue appearance.

Tristimulus colorimeter

In digital imaging, colorimeters are tristimulus devices used for color calibration. Accurate color profiles ensure consistency throughout the imaging workflow, from acquisition to output.

Spectroradiometer, spectrophotometer, spectrocolorimeter

The absolute spectral power distribution of a light source can be measured with a spectroradiometer, which works by optically collecting the light, then passing it through a monochromator before reading it in narrow bands of wavelength.

Reflected color can be measured using a spectrophotometer (also called spectroreflectometer or reflectometer), which takes measurements in the visible region (and a little beyond) of a given color sample. If the custom of taking readings at 10 nanometer increments is followed, the visible light range of 400–700 nm will yield 31 readings. These readings are typically used to draw the sample's spectral reflectance curve (how much it reflects, as a function of wavelength)—the most accurate data that can be provided regarding its characteristics.

CRT phosphors

The readings by themselves are typically not as useful as their tristimulus values, which can be converted into chromaticity co-ordinates and manipulated through color space transformations. For this purpose, a spectrocolorimeter may be used. A spectrocolorimeter is simply a spectrophotometer that can estimate tristimulus values by numerical integration (of the color matching functions' inner product with the illuminant's spectral power distribution).<ref name=schanda/> One benefit of spectrocolorimeters over tristimulus colorimeters is that they do not have optical filters, which are subject to manufacturing variance, and have a fixed spectral transmittance curve—until they age.<ref>Andreas Brant, GretagMacbeth Corporate Support (7 January 2005). "Colorimeter vs. Spectro". Colorsync-users Digest. Archived from the original on 11 July 2018. Retrieved 6 May 2008.</ref> On the other hand, tristimulus colorimeters are purpose-built, cheaper, and easier to use.<ref>Raymond Cheydleur, X-Rite (8 January 2005). "Colorimeter vs. Spectro". Colorsync-users Digest. Archived from the original on 10 July 2018. Retrieved 6 May 2008.</ref>

The CIE (International Commission on Illumination) recommends using measurement intervals under 5 nm, even for smooth spectra.<ref name=lee/> Sparser measurements fail to accurately characterize spiky emission spectra, such as that of the red phosphor of a CRT display, depicted aside.

Color temperature meter

Photographers and cinematographers use information provided by these meters to decide what color balancing should be done to make different light sources appear to have the same color temperature. If the user enters the reference color temperature, the meter can calculate the mired difference between the measurement and the reference, enabling the user to choose a corrective color gel or photographic filter with the closest mired factor.<ref name=fpe>Salvaggio, Carl (2007). Michael R. Peres (ed.). The Focal Encyclopedia of Photography: Digital Imaging, Theory and Application (4E ed.). Focal Press. p. 741. ISBN 978-0-240-80740-9.</ref>

The normals are lines of equal correlated color temperature.

Internally the meter is typically a silicon photodiode tristimulus colorimeter.<ref name=fpe/> The correlated color temperature can be calculated from the tristimulus values by first calculating the chromaticity co-ordinates in the CIE 1960 color space, then finding the closest point on the Planckian locus.

See also

References

<references group="" responsive="0"></references>

Further reading

External links

  • Colorlab MATLAB toolbox for color science computation and accurate color reproduction (by Jesus Malo and Maria Jose Luque, Universitat de Valencia). It includes CIE standard tristimulus colorimetry and transformations to a number of non-linear color appearance models (CIE Lab, CIE CAM, etc.).

Lua error in Module:Authority_control at line 181: attempt to index field 'wikibase' (a nil value).