Irradiance

In radiometry, irradiance is the radiant flux received by a surface per unit area. The SI unit of irradiance is the watt per square metre (W⋅m⁻²). The CGS unit erg per square centimetre per second (erg⋅cm⁻²⋅s⁻¹) is often used in astronomy. Irradiance is often called intensity, but this term is avoided in radiometry where such usage leads to confusion with radiant intensity. In astrophysics, irradiance is called radiant flux.<ref>Carroll, Bradley W. (2017-09-07). An introduction to modern astrophysics. p. 60. ISBN 978-1-108-42216-1. OCLC 991641816.</ref>

Spectral irradiance is the irradiance of a surface per unit frequency or wavelength, depending on whether the spectrum is taken as a function of frequency or of wavelength. The two forms have different dimensions and units: spectral irradiance of a frequency spectrum is measured in watts per square metre per hertz (W⋅m⁻²⋅Hz⁻¹), while spectral irradiance of a wavelength spectrum is measured in watts per square metre per metre (W⋅m⁻³), or more commonly watts per square metre per nanometre (W⋅m⁻²⋅nm⁻¹).

Mathematical definitions

Irradiance

Irradiance of a surface, denoted E_e ("e" for "energetic", to avoid confusion with photometric quantities), is defined as<ref name="ISO_9288-1989">"Thermal insulation — Heat transfer by radiation — Physical quantities and definitions". ISO 9288:1989. ISO catalogue. 1989. Retrieved 2015-03-15.</ref>

<math>E_\mathrm{e} = \frac{\partial \Phi_\mathrm{e}}{\partial A},</math>

where

• ∂ is the partial derivative symbol;
• Φ_e is the radiant flux received;
• A is the area.

If we want to talk about the radiant flux emitted by a surface, we speak of radiant exitance.

Spectral irradiance

Spectral irradiance in frequency of a surface, denoted E_e,ν, is defined as<ref name="ISO_9288-1989" />

<math>E_{\mathrm{e},\nu} = \frac{\partial E_\mathrm{e}}{\partial \nu},</math>

where ν is the frequency.

Spectral irradiance in wavelength of a surface, denoted E_e,λ, is defined as<ref name="ISO_9288-1989" />

<math>E_{\mathrm{e},\lambda} = \frac{\partial E_\mathrm{e}}{\partial \lambda},</math>

where λ is the wavelength.

Property

Irradiance of a surface is also, according to the definition of radiant flux, equal to the time-average of the component of the Poynting vector perpendicular to the surface:

<math>E_\mathrm{e} = \langle|\mathbf{S}|\rangle \cos \alpha,</math>

where

• ⟨ • ⟩ is the time-average;
• S is the Poynting vector;
• α is the angle between a unit vector normal to the surface and S.

For a propagating sinusoidal linearly polarized electromagnetic plane wave, the Poynting vector always points to the direction of propagation while oscillating in magnitude. The irradiance of a surface is then given by<ref name=griffiths>Griffiths, David J. (1999). Introduction to electrodynamics (3. ed., reprint. with corr. ed.). Upper Saddle River, NJ [u.a.]: Prentice-Hall. ISBN 0-13-805326-X.</ref>

<math>E_\mathrm{e} = \frac{n}{2 \mu_0 \mathrm{c}} E_\mathrm{m}^2 \cos \alpha

= \frac{n \varepsilon_0 \mathrm{c}}{2} E_\mathrm{m}^2 \cos \alpha = \frac{n }{2Z_0} E_\mathrm{m}^2 \cos \alpha,</math> where

• E_m is the amplitude of the wave's electric field;
• n is the refractive index of the medium of propagation;
• c is the speed of light in vacuum;
• μ₀ is the vacuum permeability;
• ε₀ is the vacuum permittivity;
• Z₀ is the impedance of free space.

This formula assumes that the magnetic susceptibility is negligible; i.e. that μ_r ≈ 1 where μ_r is the magnetic permeability of the propagation medium. This assumption is typically valid in transparent media in the optical frequency range.

Point source

A point source of light produces spherical wavefronts. The irradiance in this case varies inversely with the square of the distance from the source.

<math>

E = \frac P A = \frac P {4 \pi r^2}. \, </math> where

• r is the distance;
• P is the radiant flux;
• A is the surface area of a sphere of radius r.

For quick approximations, this equation indicates that doubling the distance reduces irradiation to one quarter; or similarly, to double irradiation, reduce the distance to 0.7.

In astronomy, stars are routinely treated as point sources even though they are much larger than the Earth. This is a good approximation because the distance from even a nearby star to the Earth is much larger than the star's diameter. For instance, the irradiance of Alpha Centauri A (radiant flux: 1.5 L_☉, distance: 4.34 ly) is about 2.7 × 10⁻⁸ W/m² on Earth.

Solar irradiance

Main article: Solar irradiance

The global irradiance on a horizontal surface on Earth consists of the direct irradiance E_e,dir and diffuse irradiance E_e,diff. On a tilted plane, there is another irradiance component, E_e,refl, which is the component that is reflected from the ground. The average ground reflection is about 20% of the global irradiance. Hence, the irradiance E_e on a tilted plane consists of three components:<ref name=Quaschning>Quaschning, Volker (2003). "Technology fundamentals—The sun as an energy resource". Renewable Energy World. 6 (5): 90–93.</ref>

<math>E_\mathrm{e} = E_{\mathrm{e},\mathrm{dir}} + E_{\mathrm{e},\mathrm{diff}} + E_{\mathrm{e},\mathrm{refl}}.</math>

The integral of solar irradiance over a time period is called "solar exposure" or "insolation".<ref name=Quaschning/><ref>Liu, B. Y. H.; Jordan, R. C. (1960). "The interrelationship and characteristic distribution of direct, diffuse and total solar radiation". Solar Energy. 4 (3): 1. Bibcode:1960SoEn....4....1L. doi:10.1016/0038-092X(60)90062-1.</ref>

SI radiometry units

SI radiometry units

Quantity		Unit		Dimension	Notes
Name	Symbol<ref group="nb" name="note-suffix-e">Standards organizations recommend that radiometric quantities should be denoted with suffix "e" (for "energetic") to avoid confusion with photometric or photon quantities.</ref>	Name	Symbol
Radiant energy	Qe<ref group="nb" name="note-alternative-symbol-radiometric">Alternative symbols sometimes seen: W or E for radiant energy, P or F for radiant flux, I for irradiance, W for radiant exitance.</ref>	joule	J	M⋅L2⋅T−2	Energy of electromagnetic radiation.
Radiant energy density	we	joule per cubic metre	J/m3	M⋅L−1⋅T−2	Radiant energy per unit volume.
Radiant flux	Φe<ref group="nb" name="note-alternative-symbol-radiometric"></ref>	watt	W = J/s	M⋅L2⋅T−3	Radiant energy emitted, reflected, transmitted or received, per unit time. This is sometimes also called "radiant power", and called luminosity in Astronomy.
Spectral flux	Φe,ν<ref group="nb" name="note-suffix-nu">Spectral quantities given per unit frequency are denoted with suffix "ν" (Greek letter nu, not to be confused with a letter "v", indicating a photometric quantity.)</ref>	watt per hertz	W/Hz	M⋅L2⋅T −2	Radiant flux per unit frequency or wavelength. The latter is commonly measured in W⋅nm−1.
	Φe,λ<ref group="nb" name="note-suffix-lambda">Spectral quantities given per unit wavelength are denoted with suffix "λ".</ref>	watt per metre	W/m	M⋅L⋅T−3
Radiant intensity	Ie,Ω<ref group="nb" name="note-suffix-omega">Directional quantities are denoted with suffix "Ω".</ref>	watt per steradian	W/sr	M⋅L2⋅T−3	Radiant flux emitted, reflected, transmitted or received, per unit solid angle. This is a directional quantity.
Spectral intensity	Ie,Ω,ν<ref group="nb" name="note-suffix-nu"></ref>	watt per steradian per hertz	W⋅sr−1⋅Hz−1	M⋅L2⋅T−2	Radiant intensity per unit frequency or wavelength. The latter is commonly measured in W⋅sr−1⋅nm−1. This is a directional quantity.
	Ie,Ω,λ<ref group="nb" name="note-suffix-lambda"></ref>	watt per steradian per metre	W⋅sr−1⋅m−1	M⋅L⋅T−3
Radiance	Le,Ω<ref group="nb" name="note-suffix-omega"></ref>	watt per steradian per square metre	W⋅sr−1⋅m−2	M⋅T−3	Radiant flux emitted, reflected, transmitted or received by a surface, per unit solid angle per unit projected area. This is a directional quantity. This is sometimes also confusingly called "intensity".
Spectral radiance Specific intensity	Le,Ω,ν<ref group="nb" name="note-suffix-nu"></ref>	watt per steradian per square metre per hertz	W⋅sr−1⋅m−2⋅Hz−1	M⋅T−2	Radiance of a surface per unit frequency or wavelength. The latter is commonly measured in W⋅sr−1⋅m−2⋅nm−1. This is a directional quantity. This is sometimes also confusingly called "spectral intensity".
	Le,Ω,λ<ref group="nb" name="note-suffix-lambda"></ref>	watt per steradian per square metre, per metre	W⋅sr−1⋅m−3	M⋅L−1⋅T−3
Irradiance Flux density	Ee<ref group="nb" name="note-alternative-symbol-radiometric"></ref>	watt per square metre	W/m2	M⋅T−3	Radiant flux received by a surface per unit area. This is sometimes also confusingly called "intensity".
Spectral irradiance Spectral flux density	Ee,ν<ref group="nb" name="note-suffix-nu"></ref>	watt per square metre per hertz	W⋅m−2⋅Hz−1	M⋅T−2	Irradiance of a surface per unit frequency or wavelength. This is sometimes also confusingly called "spectral intensity". Non-SI units of spectral flux density include jansky (1 Jy = 10−26 W⋅m−2⋅Hz−1) and solar flux unit (1 sfu = 10−22 W⋅m−2⋅Hz−1 = 104 Jy).
	Ee,λ<ref group="nb" name="note-suffix-lambda"></ref>	watt per square metre, per metre	W/m3	M⋅L−1⋅T−3
Radiosity	Je<ref group="nb" name="note-alternative-symbol-radiometric"></ref>	watt per square metre	W/m2	M⋅T−3	Radiant flux leaving (emitted, reflected and transmitted by) a surface per unit area. This is sometimes also confusingly called "intensity".
Spectral radiosity	Je,ν<ref group="nb" name="note-suffix-nu"></ref>	watt per square metre per hertz	W⋅m−2⋅Hz−1	M⋅T−2	Radiosity of a surface per unit frequency or wavelength. The latter is commonly measured in W⋅m−2⋅nm−1. This is sometimes also confusingly called "spectral intensity".
	Je,λ<ref group="nb" name="note-suffix-lambda"></ref>	watt per square metre, per metre	W/m3	M⋅L−1⋅T−3
Radiant exitance	Me<ref group="nb" name="note-alternative-symbol-radiometric"></ref>	watt per square metre	W/m2	M⋅T−3	Radiant flux emitted by a surface per unit area. This is the emitted component of radiosity. "Radiant emittance" is an old term for this quantity. This is sometimes also confusingly called "intensity".
Spectral exitance	Me,ν<ref group="nb" name="note-suffix-nu"></ref>	watt per square metre per hertz	W⋅m−2⋅Hz−1	M⋅T−2	Radiant exitance of a surface per unit frequency or wavelength. The latter is commonly measured in W⋅m−2⋅nm−1. "Spectral emittance" is an old term for this quantity. This is sometimes also confusingly called "spectral intensity".
	Me,λ<ref group="nb" name="note-suffix-lambda"></ref>	watt per square metre, per metre	W/m3	M⋅L−1⋅T−3
Radiant exposure	He	joule per square metre	J/m2	M⋅T−2	Radiant energy received by a surface per unit area, or equivalently irradiance of a surface integrated over time of irradiation. This is sometimes also called "radiant fluence".
Spectral exposure	He,ν<ref group="nb" name="note-suffix-nu"></ref>	joule per square metre per hertz	J⋅m−2⋅Hz−1	M⋅T−1	Radiant exposure of a surface per unit frequency or wavelength. The latter is commonly measured in J⋅m−2⋅nm−1. This is sometimes also called "spectral fluence".
	He,λ<ref group="nb" name="note-suffix-lambda"></ref>	joule per square metre, per metre	J/m3	M⋅L−1⋅T−2
See also: SI Radiometry Photometry

Comparison of photometric and radiometric quantities

See also

• Albedo
• Fluence
• Illuminance
• Insolation
• Light diffusion
• PI curve (photosynthesis-irradiance curve)
• Solar azimuth angle
• Solar irradiance
• Solar noon
• Spectral flux density
• Stefan–Boltzmann law