Offshore concrete structure
Offshore concrete structures, or concrete offshore structures, are structures built from reinforced concrete for use in the offshore marine environment. They serve the same purpose as their steel counterparts in oil and gas production and storage. The first concrete oil platform was installed in the North Sea in the Ekofisk oil field in 1973 by Phillips Petroleum, and they have become a significant part of the marine construction industry. Since then at least 47 major concrete offshore structures have been built.
Concrete offshore structures are mostly used in the petroleum industry as drilling, extraction or storage units for crude oil or natural gas. These large structures house machinery and equipment used to drill for, or extract, oil and gas.<ref name="Gerwick 2007" /> Concrete offshore structures are not limited to applications within the oil and gas industry, several conceptual studies have shown that concrete support structures for offshore wind turbines can be competitive compared to the more common steel structures, especially for greater water depths.
Depending on the circumstances, platforms may be attached to the ocean floor, consist of an artificial island, or be floating. Generally, offshore concrete structures are classified into fixed and floating structures. Fixed structures are mostly built as concrete gravity based structures (CGS, also termed as caisson type), where the loads bear down directly on the uppermost layers as soil pressure. The caisson provides buoyancy during construction and towing and acts also as a foundation structure in the operation phase. Furthermore, the caisson could be used as storage volume for oil or other liquids.<ref name="Gerwick 2007" /> Floating units may be held in position by anchored wires or chains in a spread mooring pattern. Because of the low stiffness in those systems, the natural frequency is low and the structure can move with all six degrees of freedom. Floating units serve as production units, storage and offloading units (FSO) or for crude oil or as terminals for liquefied natural gas (LNG). A more recent development is concrete sub-sea structures.<ref name="Gerwick 2007" />
Concrete offshore structures are highly durable, constructed of low-maintenance material, suitable for harsh and/or arctic environment (like ice and seismic regions),<ref name="Gerwick 2007" /> can carry heavy topsides, may be designed to provide storage capacity, can be suitable for soft ground and are economical for water depths larger than 150 m. Most gravity-type platforms need no additional fixing because of their large foundation dimensions and extremely high weight.<ref name="Gerwick 2007" />
Fixed structures
Since the 1970s, several fixed concrete platform designs have been developed. Most of the designs have in common a base caisson (normally for storage of oil) and shafts penetrating the water surface to carry the topside. In the shafts normally utility systems for offloading, drilling, draw down and ballast are put up.[citation needed]
Concrete offshore platforms of the gravity-base type are almost always constructed in their vertical attitude. This allows the inshore installation of deck girders and equipment and the later transport of the whole structure to the installation site.
The most common concrete designs are:[citation needed]
- Condeep (with one, two, three or four columns)
- ANDOC (with four columns)
- Sea Tank (with two or four columns)
- C G Doris
- Arup Concrete Gravity Substructure (CGS)
Condeep Type
Condeep refers to a make of gravity base structure for oil platforms invented by Olav Mo<ref>"Patent number 135909". Norwegian Industrial Property Office.</ref> and fabricated by Norwegian Contractors in Norway. Condeep usually consists of a base of concrete oil storage tanks from which one, three or four concrete shafts rise. The original Condeep always rests on the sea floor, and the shafts rise to about 30m above the sea level. The platform deck itself is not a part of the construction. The Condeep Platforms Brent B (1975) and Brent D (1976) were designed for a water depth of 142m in the Brent oilfield operated by Shell. Their main mass is represented by the storage tank (ca. 100m diameter and 56m high, consisting of 19 cylindrical compartments with 20m diameter). Three of the cells are extended into shafts tapering off at the surface and carrying a steel deck. The tanks serve as storage of crude oil in the operation phase. During the installation these tanks have been used as ballast compartment. Among the largest Condeep type platform are the Troll A platform and the Gullfaks C. Troll A was built within four years and deployed in 1995 to produce gas from the Troll oil field which was developed by Norske Shell, since 1996 operated by Statoil.<ref>"Troll Gas fact page". Statoil. Retrieved 2 April 2013.</ref> A detailed overview about Condeep platforms is given in a separate article.
Concrete Gravity Base Structures (CGBS) is a further development of the first-generation Condeep drilling/production platforms installed in the North Sea between the late 1970s and mid '90s. The CGBS have no oil storage facilities and the topside installations will be carried out in the field by a float-over mating method. Current[when?] or most recent projects are:[citation needed]
- Sakhalin-II platforms (Piltun-Astokhskoye B (PA-B) platform and Lunskoye (LUN-A) platform)
C G DORIS Type
The first concrete gravity platform in the North Sea was a C G Doris platform, the Ekofisk Tank, in Norwegian waters. The structure has a shape not unlike a marine sea island and is surrounded by a perforated breakwater wall (Jarlan patent). The original proposal of the French group C G DORIS (Compagnie General pour les Developments Operationelles des Richesses Sous-Marines) for a prestressed post-tensioned concrete "island" structure was adopted on cost and operational grounds. DORIS was general contractor responsible for the structural design: the concrete design was prepared and supervised on behalf of DORIS by Europe-Etudes. Further example for the C G DORIS designs are the Frigg platforms, the Ninian Central Platform and the Schwedeneck platforms.[citation needed] The design typically consists of a large volume caisson based on the sea floor merging into a monolithic structure, which is offering the base for the deck. The single main leg is surrounded by an outer breaker wall perforated with so called Jarlan holes. This wall is intended to break up waves, thus reducing their forces.
McAlpine/Sea Tank
This design is quite similar to the Condeep type.[citation needed]
ANDOC Type
To achieve its goal and extract oil within five years after discovering the Brent reservoir Shell divided up the construction of four offshore platforms. Redpath Dorman Long at Methil in Fife, Scotland getting Brent A, the two concrete Condeeps B and D were to be built in Norway by Norwegian Contractors (NC) of Stavanger, and C (also concrete) was to be built by McAlpine at Ardyne Point on the Clyde (which is known as the ANDOC (Anglo Dutch Offshore Concrete) design). The ANDOC design can be considered as the British construction industry's attempt to compete with Norway in this sector. McAlpine constructed three concrete platforms for the North Sea oil industry at Ardyne Point. The ANDOC type is very similar to the Sea Tank design, but the four concrete legs terminate and steel legs take over to support the deck.
Arup Concrete Gravity Substructure (CGS)
The Arup dry-build Concrete Gravity Substructure (CGS) concept was originally developed by Arup in 1989 for Hamilton Brothers' Ravenspurn North. The Arup CGS are designed to be simple to install, and are fully removable. Simplicity and repetition of concrete structural elements, low reinforcement and pre-stress densities as well as the use of normal density concrete lead to economical construction costs. Typical for the Arup CGS is the inclined installation technique. This technique helps to maximise economy and provide a robust offshore emplacement methodology. Further projects have been the Malampaya project in the Philippines and the Wandoo Full Field Development on the North West Shelf of Western Australia.
Floating structures
Since concrete is quite resistant to corrosion from salt water and keeps maintenance costs low, floating concrete structures have become increasingly attractive to the oil and gas industry in the last two decades. Temporary floating structures such as the Condeep platforms float during construction but are towed out and finally ballasted until they sit on the sea floor. Permanent floating concrete structures have various uses including the discovery of oil and gas deposits, in oil and gas production, as storage and offloading units and in heavy lifting systems.
Common designs for floating concrete structures are the barge or ship design, the platform design (semi-submersible, TLP) as well as the floating terminals e.g. for LNG.
Floating production, storage, and offloading systems (FPSOS) receive crude oil from deep-water wells and store it in their hull tanks until the crude is transferred into tank ships or transport barges. In addition to FPSO’s, there have been a number of ship-shaped Floating Storage and Offloading (FSO) systems (vessels with no production processing equipment) used in these same areas to support oil and gas developments. An FSO is typically used as a storage unit in remote locations far from pipelines or other infrastructures.
Semi-Submersible
Semi-submersible marine structures are typically only movable by towing. Semi-submersible platforms have the principal characteristic of remaining in a substantially stable position, presenting small movements when they experience environmental forces such as the wind, waves and currents. Semi-Submersible platforms have pontoons and columns, typically two parallel spaced apart pontoons with buoyant columns upstanding from those pontoons to support a deck. Some of the semi-submersible vessels only have a single caisson, or column, usually denoted as a buoy while others utilize three or more columns extended upwardly from buoyant pontoons. For activities which require a stable offshore platform, the vessel is then ballasted down so that the pontoons are submerged, and only the buoyant columns pierce the water surface - thus giving the vessel a substantial buoyancy with a small water-plane area. The only concrete semi-submersible in existence[when?] is Troll B.[citation needed]
Tension Leg Platform (TLP)
A Tension Leg Platform is a buoyant platform, which is held in place by a mooring system. TLP mooring is different to conventional chained or wire mooring systems. The platform is held in place with large steel tendons fastened to the sea floor. Those tendons are held in tension by the buoyancy of the hull. Statoil's Heidrun TLP is the only one with a concrete hull, all other TLPs have steel hulls.
Barge/Ship Design
FPSO or FSO systems are typically barge/ship-shaped and store crude oil in tanks located in the hull of the vessel. Their turret structures are designed to anchor the vessel, allow “weathervaning” of the units to accommodate environmental conditions, permit the constant flow of oil and production fluids from vessel to undersea field, all while being a structure capable of quick disconnect in the event of emergency.
The first barge of prestressed concrete has been designed in the early 1970s as an LPG (liquefied petroleum gas) storage barge in the Ardjuna Field (Indonesia). This barge is built of reinforced and prestressed concrete containing cylindrical tanks each having a cross-section perpendicular to its longitudinal axes that comprises a preferably circular curved portion corresponding to the bottom.
Major offshore concrete structures
 |
Following table summarizes the major[according to whom?][clarification needed] existing offshore concrete structures.
| No. | Year Installed | Operator | Field/Unit | Structure Type | Depth | Location | Design by | Construction by | Status |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1973 | Phillips | Ekofisk | Tank - DORIS[clarification needed] | 71 m | North Sea (N) | DORIS | AIP[clarification needed] | |
| 2 | 1974 | Atlantic Richfield | Ardjuna Field | LPG Barge | 43 m | Indonesia | Berger/ABAM | ||
| 3 | 1975 | Mobil | Beryl A | Condeep 3 shafts | 118 m | North Sea (UK) | NC/Olav Olsen | ||
| 4 | 1975 | Shell | Brent B | Condeep 3 shafts | 140 m | North Sea (UK) | NC/Olav Olsen | Condeep Group | AIP |
| 5 | 1975 | Elf | Frigg CDP1 | CGS 1 shaft, Jarlan Wall | 104 m | North Sea (UK) | DORIS | AIP 2009 | |
| 6 | 1976 | Shell | Brent D | Condeep 3 shafts | 140 m | North Sea (UK) | NC/Olav Olsen | Condeep Group | |
| 7 | 1976 | Elf | Frigg TP1 | CGS 2 shafts | 104 m | North Sea (UK) | Sea Tank | AIP 2009 | |
| 8 | 1976 | Elf | Frigg MCP-01 | CGS 1 shaft, Jarlan Wall | 94 m | North Sea (N) | DORIS | AIP 2009 | |
| 9 | 1977 | Shell | Dunlin A | CGS 4 shafts | 153 m | North Sea (UK) | ANDOC | ||
| 10 | 1977 | Elf | Frigg TCP2 | Condeep 3 shafts | 104 m | North Sea (N) | NC/Olav Olsen | AIP 2009 | |
| 11 | 1977 | Mobil | Statfjord A | Condeep 3 shafts | 145 m | North Sea (N) | NC/Olav Olsen | NC | |
| 12 | 1977 | Petrobras | Ubarana-Pub 3 | CGS caisson | 15 m | Brazil | ? | ||
| 13 | 1978 | Petrobras | Ubarana-Pub 2 | CGS caisson | 15 m | Brazil | ? | ||
| 14 | 1978 | Petrobras | Ubarana-Pag 2 | CGS caisson | 15 m | Brazil | ? | ||
| 15 | 1978 | TAQA Bratani | Cormorant A | CGS 4 shafts | 149 m | North Sea (UK) | Sea Tank | ||
| 16 | 1978 | Chevron | Ninian Central | CGS 1 shaft, Jarlan Wall | 136 m | North Sea (UK) | DORIS | ||
| 17 | 1978 | Shell | Brent C | CGS 4 shafts | 141 m | North Sea (UK) | Sea Tank | ||
| 18 | 1981 | Mobil | Statfjord B | Condeep 4 shafts | 145 m | North Sea (N) | NC/olav Olsen | NC | |
| 19 | 1981 | Amoco Canada | Tarsiut Island | 4 hollow caissons | 16 m | Beaufort Sea | ? | Removed | |
| 20 | 1982 | Phillips | Maureen ALC | Concrete base artic. LC | 92 m | North Sea (UK) | ? | Removed | |
| 21 | 1983 | Texaco | Schwedeneck A* | CGS Monotower | 25 m | North Sea (D) | DORIS/IMS | Removed | |
| 22 | 1983 | Texaco | Schwedeneck B* | CGS Monotower | 16 m | North Sea (D) | DORIS/IMS | Removed | |
| 23 | 1984 | Mobil | Statfjord C | Condeep 4 shafts | 145 m | North Sea (N) | NC/Olac Olsen | NC | |
| 24 | 1984 | Global Marine | Super CIDS | CGS caisson, Island | 16 m | Beaufort Sea | ? | Removed | |
| 25 | 1986 | Statoil | Gullfaks A | Condeep 4 shafts | 135 m | North Sea (N) | NC/Olav Olsen | ||
| 26 | 1987 | Statoil | Gullfaks B | Condeep 3 shafts | 141 m | North Sea (N) | NC/Olav Olsen | NC | |
| 27 | 1988 | Norsk Hydro] | Oseberg A | Condeep 4 shafts | 109 m | North Sea (N) | NC/Olav Olsen | NC | |
| 28 | 1989 | Statoil | Gullfaks C | Condeep 4 shafts | 216 m | North Sea (N) | NC/olav Olsen | NC | |
| 29 | 1989 | Hamilton Bros | N. Ravenspurn | CGS 3 shafts | 42 m | North Sea (UK) | Arup | ||
| 30 | 1989 | Phillips | Ekofisk P.B | CGS Protection Ring | 75 m | North Sea (N) | DORIS | AIP | |
| 31 | 1996 | Elf Congo | N'Kossa | Concrete Barge | 170 m | Congo | BOS/Bouygues | ||
| 32 | 1993 | Shell | NAM F3-FB | CGS 3 shafts | 43 m | North Sea (NL) | Hollandske Bet. | ||
| 33 | 1992 | Saga | Snorre Concrete Foundation Templates (CFT) | 3 cells suction anchores | 310 m | North Sea (N) | NC/Olav Olsen | NC | |
| 34 | 1993 | Statoil | Sleipner A | Condeep 4 shafts | 82 m | North Sea (N) | NC/Olav Olsen | NC | |
| 35 | 1993 | Shell | Draugen | Condeep Monotower | 251 m | North Sea (N) | NC/Olav Olsen | NC | |
| 36 | 1994 | Conoco | Heidrun | Concrete TLP | 350 m | North Sea (N) | NC/Olav Olsen | NC | |
| 37 | 1996 | BP | Harding | CGS | 109 m | North Sea (UK) | Taylor Wood Eng. | ||
| 38 | 1995 | Shell | Troll A | Condeep 4 shafts | 303 m | North Sea (N) | NC/Olav Olsen | NC | |
| 39 | 1995 | Conoco | Heidrun TLP | Concrete TLP | 350 m | North Sea (N) | NC/Olav Olsen | NC | |
| 40 | 1995 | Norsk Hydro | Troll B | Semisub | 325 m | North Sea (N) | DORIS | KCC | |
| 41 | 1996 | Esso | West Tuna | CGS 3 shafts | 61 m | Australia | Kinhill/DORIS | ||
| 42 | 1996 | Esso | Bream B | CGS 1 shaft | 61 m | Australia | Kinhill/DORIS | ||
| 43 | 1996 | Ampolex | Wandoo | CGS 4 shafts | 54 m | Australia | Arup | ||
| 44 | 1997 | Mobil | Hibernia | CGS 4 shafts | 80 m | Canada | DORIS | ||
| 45 | 1999 | Amerada Hess | South Arne | CGS 1 shaft | 60 m | North Sea (DK) | Taylor Woodrow | ||
| 46 | 2000 | Shell | Malampaya | CGS 4 shafts | 43 m | Philippines | Arup | ||
| 47 | 2005 | Sakhalin Energy (SEIC) | Lunskoye A | CGS 4 shafts | 48 m | Sakhalin (R) | AK/GMAO | ||
| 48 | 2005 | Sakhalin Energy (SEIC) | Sakhalin PA-B | CGS 4 shafts | 30 m | Sakhalin (R) | AK/GMAO | ||
| 49 | 2008 | ExxonMobil | Adriatic LNG | LNG terminal | 29 m | Adriatic Sea (I) | AK/GMAO | ||
| 50 | 2008 | MPU Heavy Lifter (Not completed) | Heavy Lift Vessel | LWA | n/a | na | Olav Olsen | Demolished | |
| 51 | 2012 | Exxon Neftegas Limited (ENL) | Sakhalin-1 Arkutun Dagi (Golden Eagle) | GBS 4 shafts | 33 m | Sakhalin-1 (R) | AK/GMAO | ||
| 52 | 2017 | ExxonMobil Canada Properties | Hebron | GBS Monotower | 109 m | Canada | KKC/GMAO | KKC | |
| 53 | 20?? | Husky Energy | West White Rose | GBS Monotower | 118 m | Canada | Arup |
- Platform gallery
-
A view from the South East of Troll A Platform
-
A 'Statfjord' Gravity base structure under construction
-
Lunskoye platform under construction
References
Printed literature
- Clauss, Günther; E. Lehmann; C. Österfaard (1992). Offshore Structures Volume I: Conceptual Design and Hydromechanics. Springer-Verlag Berlin Heidelberg New York. ISBN 978-3-540-19709-6.
- Clauss, Günther; E. Lehmann; C. Österfaard (1993). Offshore Structures Volume II: Strength and Safety for Structural Design. Springer Verlag Berlin Heidelberg New York. ISBN 978-3-540-19770-6.
- Olsen, T. O. (2001). "Recycling of offshore concrete structures". Structural Concrete. 2 (3): 169–173. doi:10.1680/stco.2001.2.3.169. ISSN 1464-4177.
