Stab-Lok
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
Stab-Lok is a brand name of electrical circuit breakers that were manufactured primarily by Federal Pacific Electric between 1950-1980.<ref>Terry, Ken (26 February 2010). "Hazards of the Federal Pacific electrical panel made in the '50s". Redlands Daily Facts. Archived from the original on 9 April 2016. Retrieved 5 December 2013.</ref><ref>"HELTER SHELTER: WORRISOME ELECTRICAL THINGS: It's all in the wiring; Federal Pacific (FPE) Stab-Lok Electrical Panels // Aluminum Wiring // Old Rag Wires in Attics". Boise Weekly. 6 August 2002. Archived from the original on 7 April 2016. Retrieved 5 December 2013.</ref> In June 1980, Reliance Electric, which had purchased FPE, reported to the United States Consumer Product Safety Commission that "many FPE circuit breakers did not fully comply with Underwriters Laboratories, Inc. (UL) requirements. Commission testing confirmed that these breakers fail certain UL calibration test requirements."<ref>"Commission Closes Investigation Of FPE Circuit Breakers And Provides Safety Information For Consumers". U.S. Consumer Product Safety Commission. Retrieved 2021-07-30.</ref> Professional home inspectors now routinely recommend removing and replacing Stab-Lok breakers and panels that remain in service, as they may pose a fire hazard.<ref>Leamy, Elizabeth (2019-05-09). "Despite previous safety concerns, this circuit breaker is still in homes". Washington Post. Retrieved 2021-07-30.</ref>
Safety issues
It has been widely reported in news media and online that Stab-Lok circuit breakers, and panels, do not meet the requirements of the National Electrical Code (NFPA 70) and Underwriters Laboratories, and should be replaced.
According to a 2012 news report by NBC Bay Area (KNTV):
The "Stab-Lok” circuit breaker and panel produced by Federal Pacific Electric (FPE) installed in hundreds of thousands of homes in the Bay Area may cause house fires, according decades of documentation and electrical experts interviewed by the NBC Bay Area Investigative Unit. Stab-Lok circuit breakers are most commonly found in houses built before 1990.
— Federal Pacific Circuit Breakers: Investigation Finds Decades of Danger.<ref>Kovaleski, Tony (2012-09-29). "Federal Pacific Circuit Breakers: Investigation Finds Decades of Danger". NBC Bay Area. NBC Bay Area; KNTV. Archived from the original on 2021-03-02. Retrieved 2021-07-30.</ref>
According to an independent analysis performed by Jesse Aronson, P.E.:
FPE and replacement brands of Stab-Lok® circuit breakers have a high defect rate. They do not provide the level of circuit protection required by the NEC (National Electrical Code). Homeowners should be alerted to this safety defect and advised to have it corrected. FPE Stab-Lok® circuit breaker panels should be replaced unless the occupants are informed and willing to live with the resulting increased risk of fire and injury.
— "HAZARDOUS FPE CIRCUIT BREAKERS AND PANELS: Information for Homeowners, Inspectors, and Electricians" <ref>Aronson, Jesse, PhD, PE. "Hazardous FPE Circuit Breakers and Panels: Information for Homeowners, Inspectors, and Electricians (Updated November 10, 2017)" (PDF). Retrieved 2021-07-30.{{cite web}}: CS1 maint: multiple names: authors list (link)</ref>
According to ANGI Homeservices, formerly known as Angie's List,
If your home has a Federal Pacific Electric (FPE) circuit breaker panel with Stab-Lok circuit breakers, you run a significant risk of breaker malfunction and fire. While these types of circuit breakers were once commonly installed in houses across the country, many are defective. To be on the safe side, it’s a good idea to replace any Federal Pacific breakers in your home. <ref>Wack, Margaret (2021-06-09). "What You Need to Know About Federal Pacific Breakers". Angie's List. ANGI HomeServices / Angie's List. Archived from the original on 2021-06-12. Retrieved 2021-07-30.</ref>
Angie's List and NBC Bay Area both highlighted an October 2002 ruling in a New Jersey Superior Court, which found that FPE (Federal Pacific Electric), the manufacturer of the Stab-Lok breakers and panels, "knowingly and purposefully [sic] distributed circuit breakers which were not tested to meet UL standards as indicated on their label".<ref>"Order for Partial Summary Judgement, Yacout vs. Federal Pacific Electric Company, et al., MID-L-2904-97" (PDF). FPE-Info. Middlesex County, New Jersey. Archived from the original (PDF) on 2010-07-14. Retrieved 2021-07-30.</ref>
Government response
After the 1979 sale of Federal Pacific Electric to Reliance Electric, a unit of Exxon Corporation, Reliance reported to the U.S. Consumer Product Safety Commission that the Stab-Lok breakers and panels did not meet the requirements published by Underwriters Laboratories, even though the products bore UL markings. The CPSC performed its own testing and concluded:
Commission testing confirmed that these breakers fail certain UL calibration test requirements.<ref>"Commission Closes Investigation Of FPE Circuit Breakers And Provides Safety Information For Consumers". U.S. Consumer Product Safety Commission. Retrieved 2021-07-30.</ref>
After a two-year investigation into whether these test failures would create a "serious risk of injury to consumers", the CPSC closed the investigation, citing a lack of budget to continue:
The Commission staff estimates that it would cost several million dollars to gather the data necessary to assess fully whether those circuit breakers that are installed in homes ... present a risk to the public.<ref>"Commission Closes Investigation Of FPE Circuit Breakers And Provides Safety Information For Consumers". U.S. Consumer Product Safety Commission. Retrieved 2021-07-30.</ref>
CPSC urged consumers to remain vigilant and report any failed breakers or equipment so it could continue to collect data.
Fate
The Stab-Lok brand was discontinued, and its maker, FPE, went through a succession of later owners: Reliance Electric, owned by Exxon, in 1979; Exxon later sold Reliance Electric to Rockwell, which sold the business to Baldor Electric in 2006.<ref>"Rockwell to sell Reliance Electric for $1.8B". Milwaukee Business Journal.</ref> Baldor was bought by ABB in 2011.<ref>ABB (Press Release) (2011-11-30). "ABB Acquires Baldor Electric For $4.2 Billion In Cash". Manufacturing.net. Archived from the original on 2021-07-31. Retrieved 2021-07-30.</ref>
Other companies began building Stab-Lok style breakers through around 1990. According to a Washington Post article, home inspection professionals now routinely advise consumers to remove and replace those panels that remain in service.<ref>Leamy, Elizabeth (2019-05-09). "Despite previous safety concerns, this circuit breaker is still in homes". Washington Post. Retrieved 2021-07-30.</ref>
Providers
 |
Other manufacturers of Stab-Lok breakers may have included:[citation needed]
- American Circuit Breaker Corporation[citation needed]
- Challenger[citation needed]
- Thomas & Betts[citation needed]
- Connecticut Electric - Unique Breakers Inc. (UBI)[citation needed]
