This is a good article. Click here for more information.

Triboelectric effect

From KYNNpedia

Styrofoam peanuts clinging to a cat's fur due to static electricity.
Articles about
Electromagnetism
Solenoid
Electrostatics
Magnetostatics
Electrodynamics
Electrical network
Magnetic circuit
Covariant formulation
Scientists

The triboelectric effect (also known as triboelectricity, triboelectric charging, triboelectrification, or tribocharging) describes electric charge transfer between two objects when they contact or slide against each other. It can occur with different materials, such as the sole of a shoe on a carpet, or between two pieces of the same material. It is ubiquitous, and occurs with differing amounts of charge transfer (tribocharge) for all solid materials. There is evidence that tribocharging can occur between combinations of solids, liquids and gases, for instance liquid flowing in a solid tube or an aircraft flying through air.

Often static electricity is a consequence of the triboelectric effect when the charge stays on one or both of the objects and is not conducted away. The term triboelectricity has been used to refer to the field of study or the general phenomenon of the triboelectric effect,<ref name=":19" /><ref name=":34" /><ref name=":10" /><ref name=":28" /> or to the static electricity that results from it.<ref>"Triboelectricity". Education.MRSEC.Wisc.edu. Materials Research Science and Engineering Centers Education Group / University of Wisconsin–Madison. 2020. Retrieved 21 July 2023.</ref><ref>"Collins English Dictionary". 23 July 2023. Retrieved 23 July 2023.</ref> When there is no sliding, tribocharging is sometimes called contact electrification, and any static electricity generated is sometimes called contact electricity. The terms are often used interchangeably, and may be confused.

Triboelectric charge plays a major role in industries such as packaging of pharmaceutical powders,<ref name=":10">Watanabe, H.; Ghadiri, M; Matsuyama, T.; Diing, Y.; Pitt, K.; Maruyama, H.; Matsusaka, S.; Masuda, H. (2007). "Triboelectrification of pharmaceutical powders by particle impact". International Journal of Pharmaceutics. 334 (1–2): 149–155. doi:10.1016/j.ijpharm.2006.11.005. hdl:2433/194296. ISSN 0378-5173. PMID 17141989.</ref><ref>Wong, Jennifer; Kwok, Philip Chi Lip; Chan, Hak-Kim (2015). "Electrostatics in pharmaceutical solids". Chemical Engineering Science. 125: 225–237. Bibcode:2015ChEnS.125..225W. doi:10.1016/j.ces.2014.05.037.</ref> and in many processes such as dust storms<ref name=":24">Kok, Jasper F.; Renno, Nilton O. (2008). "Electrostatics in Wind-Blown Sand". Physical Review Letters. 100 (1): 014501. arXiv:0711.1341. Bibcode:2008PhRvL.100a4501K. doi:10.1103/physrevlett.100.014501. ISSN 0031-9007. PMID 18232774. S2CID 9072006.</ref> and planetary formation.<ref name=":36">Blum, Jürgen; Wurm, Gerhard (2008). "The Growth Mechanisms of Macroscopic Bodies in Protoplanetary Disks". Annual Review of Astronomy and Astrophysics. 46 (1): 21–56. Bibcode:2008ARA&A..46...21B. doi:10.1146/annurev.astro.46.060407.145152. ISSN 0066-4146.</ref> It can also increase friction and adhesion. While many aspects of the triboelectric effect are now understood and extensively documented, significant disagreements remain in the current literature about the underlying details.

History

See also: Timeline of electromagnetism and classical optics, History of electromagnetic theory, and Electric charge § History

The historical development of triboelectricity is interwoven with work on static electricity and electrons themselves. Experiments involving triboelectricity and static electricity occurred before the discovery of the electron. The name ēlektron (ἤλεκτρον) is Greek for amber,<ref name="DictOrigins">Shipley, J. T. (1945). Dictionary of Word Origins. The Philosophical Library. p. 133. ISBN 978-0-88029-751-6.</ref><ref name=":23">Benjamin, Park (1898). A history of electricity (the intellectual rise in electricity) from antiquity to the days of Benjamin Franklin by Park Benjamin ... New York: J. Wiley. pp. 1–45, Chapters 1-2. doi:10.5962/bhl.title.19628.</ref> which is connected to the recording of electrostatic charging by Thales of Miletus around 585 BCE,<ref name="Lacks">Iversen, Paul; Lacks, Daniel J. (2012). "A life of its own: The tenuous connection between Thales of Miletus and the study of electrostatic charging". Journal of Electrostatics. 70 (3): 309–311. doi:10.1016/j.elstat.2012.03.002. ISSN 0304-3886.</ref> and possibly others even earlier.<ref name="Lacks" /><ref name="Roller 1953 343–356">Roller, Duane; Roller, Duane H. D. (1953). "The Prenatal History of Electrical Science". American Journal of Physics. 21 (5): 343–356. Bibcode:1953AmJPh..21..343R. doi:10.1119/1.1933449. ISSN 0002-9505.</ref> The prefix tribo- (Greek for 'rub') refers to sliding, friction and related processes, as in tribology.<ref>"tribo-", Wiktionary, the free dictionary, 26 August 2023, retrieved 5 September 2023</ref>

From the axial age (8th to 3rd century BC) the attraction of materials due to static electricity by rubbing amber and the attraction of magnetic materials were considered to be similar or the same.<ref name=":23" /> There are indications that it was known both in Europe and outside, for instance China and other places.<ref name=":23" /> Syrian women used amber whorls in weaving and exploited the triboelectric properties, as noted by Pliny the Elder.<ref name=":23" /><ref>"The Properties of Amber". Ancient Carved Ambers in the J. Paul Getty Museum. Retrieved 16 August 2023.</ref>

The effect was mentioned in records from the medieval period. Archbishop Eustathius of Thessalonica, Greek scholar and writer of the 12th century, records that Woliver, king of the Goths, could draw sparks from his body. He also states that a philosopher was able, while dressing, to draw sparks from his clothes, similar to the report by Robert Symmer of his silk stocking experiments, which may be found in the 1759 Philosophical Transactions.<ref name="EncyclopediaAmericana">Maver, William Jr. (1918). "Electricity, Its History and Progress". The Encyclopedia Americana: A Library of Universal Knowledge. Vol. X. New York: Encyclopedia Americana Corp. pp. 172 ff. – via Internet Archive.</ref>

Generator built by Francis Hauksbee<ref name=":22">Hauksbee, Francis (1719). "Physico-mechanical experiments". (No Title) (2nd ed.). London: J. Senex & W. Taylor.</ref>

It is generally considered<ref name="Roller 1953 343–356" /> that the first major scientific analysis was by William Gilbert in his publication De Magnete in 1600.<ref name="EncyclopediaAmericana" /><ref>Gilbert, William; Mottelay, Paul Fleury (1991) [1893]. De magnete (Facsimile ed.). New York: Dover publ. ISBN 978-0-486-26761-6.</ref> He discovered that many more materials than amber such as sulphur, wax, glass could produce static electricity when rubbed, and that moisture prevented electrification. Others such as Sir Thomas Browne made important contributions slightly later, both in terms of materials and the first use of the word electricity in Pseudodoxia Epidemica.<ref>Knight, Thomas Brown (1672). Pseudodoxia epidemica: or, Enquiries into very many received tenents and commonly presumed truths (6th and last ed., corr. and enl.). Book II Chapter IV. pp. 82–86. doi:10.1037/13887-000.</ref> He noted that metals did not show triboelectric charging, perhaps because the charge was conducted away. An important step was around 1663 when Otto von Guericke invented<ref>de V. Heathcote, N.H. (1950). "Guericke's sulphur globe". Annals of Science. 6 (3): 293–305. doi:10.1080/00033795000201981. ISSN 0003-3790.</ref> a machine that could automate triboelectric charge generation, making it much easier to produce more tribocharge; other electrostatic generators followed.<ref name="EncyclopediaAmericana" /> For instance, shown in the Figure is an electrostatic generator built by Francis Hauksbee the Younger. Another key development was in the 1730s when C.F. du Fay pointed out that there were two types of charge which he named vitreous and resinous.<ref>"V. A letter from Mons. Du Fay, F. R. S. and of the Royal Academy of Sciences at Paris, to his Grace Charles Duke of Richmond and Lenox, concerning electricity. Translated from the French by T. S. M D". Philosophical Transactions of the Royal Society of London (in Latina). 38 (431): 258–266. 1733. doi:10.1098/rstl.1733.0040. ISSN 0261-0523. S2CID 186208701.</ref><ref>Keithley, Joseph F. (1999). The story of electrical and magnetic measurements: from 500 BC to the 1940s. New York: IEEE Press. ISBN 978-0-7803-1193-0.</ref> These names corresponded to the glass (vitreous) rods and bituminous coal, amber, or sealing wax (resinous) used in du Fay's experiments.<ref name="Whittaker">Whittaker, Edmund T. (1989). A history of the theories of aether & electricity. 2: The modern theories, 1900–1926 (Repr ed.). New York: Dover Publ. ISBN 978-0-486-26126-3.</ref>: I:44  These names were used throughout the 19th century. The use of the terms positive and negative for types of electricity grew out of the independent work of Benjamin Franklin around 1747 where he ascribed electricity to an over- or under- abundance of an electrical fluid.<ref name="Whittaker" />: 43–48 

At about the same time Johan Carl Wilcke published in a 1757 paper a triboelectric series.<ref name=":35">Wilcke, Johan Carl (1757). Disputatio physica experimentalis, de electricitatibus contrariis ... (in Latina). Typis Ioannis Iacobi Adleri.</ref><ref name="Dictionary of Scientific Biography">Gillispie, C. C. (1976). Dictionary of Scientific Biography. New York: Scribner. pp. 352–353.</ref> In this work materials were listed in order of the polarity of charge separation when they are touched or slide against another. A material towards the bottom of the series, when touched to a material near the top of the series, will acquire a more negative charge.

The first systematic analysis of triboelectricity is considered to be the work of Jean Claude Eugène Péclet in 1834.<ref>Peclet, M. E. (1834). "Memoire sur l'Electricite produit par le Frottement". Annales de chimie et de physique. lvii: 337–416.</ref> He studied triboelectric charging for a range of conditions such as the material, pressure and rubbing of surfaces. It was some time before there were further quantitative works by Owen in 1909<ref name=":37">Owen, Morris (1909). "XLII. On frictional electricity". The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science. 17 (100): 457–465. doi:10.1080/14786440408636622. ISSN 1941-5982.</ref> and Jones in 1915.<ref name=":38">Jones, W. Morris (1915). "XXX. Frictional electricity on insulators and metals". The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science. 29 (170): 261–274. doi:10.1080/14786440208635305. ISSN 1941-5982.</ref> The most extensive early set of experimental analyses was from 1914–1930 by the group of Professor Shaw, who laid much of the foundation of experimental knowledge. In a series of papers he: was one of the first to mention some of the failings of the triboelectric series, also showing that heat had a major effect on tribocharging;<ref name=":33">Shaw, P. E. (1914). "The Electrification of Surfaces as Affected by Heat". Proceedings of the Physical Society of London. 27 (1): 208–216. Bibcode:1914PPSL...27..208S. doi:10.1088/1478-7814/27/1/317. ISSN 1478-7814.</ref> analyzed in detail where different materials would fall in a triboelectric series, at the same time pointing out anomalies;<ref name=":19" /> separately analyzed glass and solid elements<ref name=":27">Shaw, P. E.; Jex, C. S. (1928). "Tribo-electricity and friction. II.—Glass and solid elements". Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character. 118 (779): 97–108. Bibcode:1928RSPSA.118...97S. doi:10.1098/rspa.1928.0037. ISSN 0950-1207.</ref> and solid elements and textiles,<ref name="Shaw 1928 108–113">Shaw, P. E.; Jex, C. S. (1928). "Tribo-Electricity and Friction. III. Solid Elements and Textiles". Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character. 118 (779): 108–113. Bibcode:1928RSPSA.118..108S. doi:10.1098/rspa.1928.0038. ISSN 0950-1207. JSTOR 94891.</ref> carefully measuring both tribocharging and friction; analyzed charging due to air-blown particles;<ref>Shaw, P. W. (1929). "Tribo-electricity and friction. IV.—Electricity due to air-blown particles". Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character. 122 (789): 49–58. Bibcode:1929RSPSA.122...49S. doi:10.1098/rspa.1929.0004. ISSN 0950-1207.</ref> demonstrated that surface strain and relaxation played a critical role for a range of materials,<ref name="royalsocietypublishing.org">Shaw, P. E.; Hanstock, R. F. (1930). "Triboelectricity and friction. —V. On surface strain and relaxation of like solids". Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character. 128 (808): 474–480. Bibcode:1930RSPSA.128..474S. doi:10.1098/rspa.1930.0125. ISSN 0950-1207. S2CID 137932809.</ref><ref>Shaw, P. E.; Hanstock, R. F. (1930). "Triboelectricity and friction.—VI. On surface strain and relaxation for unlike solids". Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character. 128 (808): 480–487. Bibcode:1930RSPSA.128..480S. doi:10.1098/rspa.1930.0126. ISSN 0950-1207.</ref> and examined the tribocharging of many different elements with silica.<ref>Shaw, P. E.; Leavery, E. W. (1932). "Triboelectricity and friction. VII.—Quantitative results for metals and other solid elements, with silica". Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character. 138 (836): 502–514. Bibcode:1932RSPSA.138..502S. doi:10.1098/rspa.1932.0199. ISSN 0950-1207. S2CID 136574422.</ref>

Much of this work predates an understanding of solid state variations of energies levels with position, and also band bending.<ref name=":16" /> It was in the early 1950s in the work of authors such as Vick<ref name=":1" /> that these were taken into account along with concepts such as quantum tunnelling and behavior such as Schottky barrier effects, as well as including models such as asperities for contacts based upon the work of Frank Philip Bowden and David Tabor.<ref name=":18" />

Basic characteristics

Triboelectric charging occurs when two materials are brought into contact then separated, or slide against each other. An example is rubbing a plastic pen on a shirt sleeve made of cotton, wool, polyester, or the blended fabrics used in modern clothing.<ref>A Plastic Comb Rubbed With a Cotton Cloth Attracts Small Pieces of Paper, retrieved 5 September 2023</ref> An electrified pen will attract and pick up pieces of paper less than a square centimeter, and will repel a similarly electrified pen. This repulsion is detectable by hanging both pens on threads and setting them near one another. Such experiments led to the theory of two types of electric charge, one being the negative of the other, with a simple sum respecting signs giving the total charge. The electrostatic attraction of the charged plastic pen to neutral uncharged pieces of paper (for example) is due to induced dipoles<ref name=":16" />: Chapter 27  in the paper.

The triboelectric effect can be unpredictable because many details are often not controlled.<ref>Lowell, J.; Akande, A. R. (1988). "Contact electrification-why is it variable?". Journal of Physics D: Applied Physics. 21 (1): 125–137. Bibcode:1988JPhD...21..125L. doi:10.1088/0022-3727/21/1/018. ISSN 0022-3727. S2CID 250782776.</ref> Phenomena which do not have a simple explanation have been known for many years. For instance, as early as 1910, Jaimeson observed that for a piece of cellulose, the sign of the charge was dependent upon whether it was bent concave or convex during rubbing.<ref name=":8">Jamieson, Walter (1910). "The Electrification of Insulating Materials". Nature. 83 (2111): 189. Bibcode:1910Natur..83..189J. doi:10.1038/083189a0. ISSN 0028-0836. S2CID 3954491.</ref> The same behavior with curvature was reported in 1917 by Shaw,<ref name=":19" /> who noted that the effect of curvature with different materials made them either more positive or negative. In 1920, Richards pointed out that for colliding particles the velocity and mass played a role, not just what the materials were.<ref name=":6">Richards, Harold F. (1920). "Electrification by Impact". Physical Review. 16 (4): 290–304. Bibcode:1920PhRv...16..290R. doi:10.1103/PhysRev.16.290. ISSN 0031-899X.</ref> In 1926, Shaw pointed out that with two pieces of identical material, the sign of the charge transfer from "rubber" to "rubbed" could change with time.<ref name=":7">Shaw, P. E. (1926). "Electrical separation between identical solid surfaces". Proceedings of the Physical Society. 39 (1): 449–452. Bibcode:1926PPS....39..449S. doi:10.1088/0959-5309/39/1/344. ISSN 0959-5309.</ref>

There are other more recent experimental results which also do not have a simple explanation. For instance the work of Burgo and Erdemir,<ref name=":12">Burgo, Thiago A. L.; Erdemir, Ali (2014). "Bipolar Tribocharging Signal During Friction Force Fluctuations at Metal–Insulator Interfaces". Angewandte Chemie International Edition. 53 (45): 12101–12105. doi:10.1002/anie.201406541. PMID 25168573.</ref> which showed that the sign of charge transfer reverses between when a tip is pushing into a substrate versus when it pulls out; the detailed work of Lee et al<ref>Lee, Victor; James, Nicole M.; Waitukaitis, Scott R.; Jaeger, Heinrich M. (2018). "Collisional charging of individual submillimeter particles: Using ultrasonic levitation to initiate and track charge transfer". Physical Review Materials. 2 (3): 035602. arXiv:1801.09278. Bibcode:2018PhRvM...2c5602L. doi:10.1103/PhysRevMaterials.2.035602. ISSN 2475-9953. S2CID 118904552.</ref> and Forward, Lacks and Sankaran<ref name="Shinbrot 2008 24004">Shinbrot, T.; Komatsu, T. S.; Zhao, Q. (2008). "Spontaneous tribocharging of similar materials". EPL (Europhysics Letters). 83 (2): 24004. Bibcode:2008EL.....8324004S. doi:10.1209/0295-5075/83/24004. ISSN 0295-5075. S2CID 40379103.</ref> and others measuring the charge transfer during collisions between particles of zirconia of different size but the same composition, with one size charging positive, the other negative; the observations using sliding<ref name="Shinbrot 2008 24004" /> or Kelvin probe force microscope<ref name=":9" /> of inhomogeneous charge variations between nominally identical materials.

Illustration of triboelectric charging from contacting asperities

The details of how and why tribocharging occurs are not established science as of 2023. One component is the difference in the work function (also called the electron affinity) between the two materials.<ref name=":4">Harper, W. E. (1951). "The Volta effect as a cause of static electrification". Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences. 205 (1080): 83–103. Bibcode:1951RSPSA.205...83H. doi:10.1098/rspa.1951.0019. ISSN 0080-4630. S2CID 110618773.</ref> This can lead to charge transfer as, for instance, analyzed by Harper.<ref name=":2">Harper, W. R. (1998). Contact and frictional electrification. Laplacian Press. ISBN 1-885540-06-X. OCLC 39850726.</ref><ref name=":13" /> As has been known since at least 1953,<ref name=":1">Vick, F.A. (1953). "Theory of contact electrification". British Journal of Applied Physics. 4 (S2): S1–S5. Bibcode:1953BJAP....4S...1V. doi:10.1088/0508-3443/4/S2/301. ISSN 0508-3443.</ref><ref>Castle, G. S. P. (1997). "Contact charging between insulators". Journal of Electrostatics. 40–41: 13–20. doi:10.1016/S0304-3886(97)00009-0.</ref><ref>Bailey, Adrian G. (2001). "The charging of insulator surfaces". Journal of Electrostatics. 51–52: 82–90. doi:10.1016/S0304-3886(01)00106-1.</ref><ref>Schein, L. B. (2007). "Recent Progress and Continuing Puzzles in Electrostatics". Science. 316 (5831): 1572–1573. doi:10.1126/science.1142325. ISSN 0036-8075. PMID 17569848. S2CID 136500498.</ref> the contact potential is part of the process but does not explain many results, such as the ones mentioned in the last two paragraphs.<ref name=":8" /><ref name=":7" /><ref name=":12" /><ref name=":9" /> Many studies have pointed out issues with the work function difference (Volta potential) as a complete explanation.<ref>Elsdon, R. (1975). Fundamental and applied aspects of contact electrification (PhD). University of Cambridge. doi:10.17863/CAM.16064.</ref><ref>Akande, A. R.; Lowell, J (1987). "Charge transfer in metal/polymer contacts". Journal of Physics D: Applied Physics. 20 (5): 565–578. Bibcode:1987JPhD...20..565A. doi:10.1088/0022-3727/20/5/002. ISSN 0022-3727. S2CID 250812629.</ref><ref name=":17">Kok, Jasper F.; Lacks, Daniel J. (2009). "Electrification of granular systems of identical insulators". Physical Review E. 79 (5): 051304. arXiv:0902.3411. Bibcode:2009PhRvE..79e1304K. doi:10.1103/PhysRevE.79.051304. ISSN 1539-3755. PMID 19518446. S2CID 2225090.</ref><ref name=":28">Galembeck, Fernando; Burgo, Thiago A. L.; Balestrin, Lia B. S.; Gouveia, Rubia F.; Silva, Cristiane A.; Galembeck, André (2014). "Friction, tribochemistry and triboelectricity: recent progress and perspectives". RSC Adv. 4 (109): 64280–64298. Bibcode:2014RSCAd...464280G. doi:10.1039/C4RA09604E. ISSN 2046-2069.</ref> There is also the question of why sliding is often important. Surfaces have many nanoscale asperities where the contact is taking place,<ref name=":18">Bowden, Frank Philip; Tabor, David (2001) [1950]. The friction and lubrication of solids. "Oxford Classic Texts" series (Repr ed.). Oxford: Clarendon Press. ISBN 978-0-19-850777-2.</ref> which has been taken into account in many approaches to triboelectrification.<ref name=":2" /> Volta and Helmholtz suggested that the role of sliding was to produce more contacts per second.<ref name=":13">Harper, W. R. (1961). "Electrification following the contact of solids". Contemporary Physics. 2 (5): 345–359. Bibcode:1961ConPh...2..345H. doi:10.1080/00107516108205281. ISSN 0010-7514.</ref> In modern terms, the idea is that electrons move many times faster than atoms, so the electrons are always in equilibrium when atoms move (the Born–Oppenheimer approximation). With this approximation, each asperity contact during sliding is equivalent to a stationary one; there is no direct coupling between the sliding velocity and electron motion.<ref>Born, M.; Oppenheimer, R. (1927). "Zur Quantentheorie der Molekeln". Annalen der Physik (in Deutsch). 389 (20): 457–484. Bibcode:1927AnP...389..457B. doi:10.1002/andp.19273892002.</ref> An alternative view (beyond the Born–Oppenheimer approximation) is that sliding acts as a quantum mechanical pump which can excite electrons to go from one material to another.<ref name=":11">Alicki, Robert; Jenkins, Alejandro (2020). "Quantum Theory of Triboelectricity". Physical Review Letters. 125 (18): 186101. arXiv:1904.11997. Bibcode:2020PhRvL.125r6101A. doi:10.1103/PhysRevLett.125.186101. ISSN 0031-9007. PMID 33196235. S2CID 139102854.</ref> A different suggestion is that local heating during sliding matters,<ref>Liu, Guangming; Liu, Jun; Dou, Wenjie (2022). "Non-adiabatic quantum dynamics of tribovoltaic effects at sliding metal–semiconductor interfaces". Nano Energy. 96: 107034. arXiv:2112.04687. doi:10.1016/j.nanoen.2022.107034. S2CID 247006239.</ref> an idea first suggested by Frenkel in 1941.<ref>Frenkel, J. (1941). "On the electrification of dielectrics by friction". Journal of Physics-USSR. V (1): 25–29.</ref> Other papers have considered that local bending at the nanoscale produces voltages which help drive charge transfer via the flexoelectric effect.<ref name=":5">Mizzi, C. A.; Lin, A. Y. W.; Marks, L. D. (2019). "Does Flexoelectricity Drive Triboelectricity?". Physical Review Letters. 123 (11): 116103. arXiv:1904.10383. Bibcode:2019PhRvL.123k6103M. doi:10.1103/PhysRevLett.123.116103. ISSN 0031-9007. PMID 31573269. S2CID 128361741.</ref><ref name=":26" /> There are also suggestions that surface or trapped charges are important.<ref>Fukada, E.; Fowler, J. F. (1958). "Triboelectricity and Electron Traps in Insulating Materials: Some Correlations". Nature. 181 (4610): 693–694. Bibcode:1958Natur.181..693F. doi:10.1038/181693b0. ISSN 0028-0836. S2CID 4269111.</ref><ref>Guerret-Piecourt, Christelle; Bec, Sandrine; Treheux, Daniel (2001). "Electrical charges and tribology of insulating materials". Comptes Rendus de l'Académie des Sciences, Série IV. 2 (5): 761–774. arXiv:0707.2649. Bibcode:2001CRASP...2..761G. doi:10.1016/S1296-2147(01)01218-5.</ref> More recently there have been attempts to include a full solid state description.<ref>Pan, Shuaihang; Zhang, Zhinan (2017). "Triboelectric effect: A new perspective on electron transfer process". Journal of Applied Physics. 122 (14): 144302. Bibcode:2017JAP...122n4302P. doi:10.1063/1.5006634. ISSN 0021-8979.</ref><ref>Olson, Karl P.; Mizzi, Christopher A.; Marks, Laurence D. (2022). "Band Bending and Ratcheting Explain Triboelectricity in a Flexoelectric Contact Diode". Nano Letters. 22 (10): 3914–3921. arXiv:2201.04688. Bibcode:2022NanoL..22.3914O. doi:10.1021/acs.nanolett.2c00107. ISSN 1530-6984. PMID 35521939. S2CID 245906054.</ref><ref>Willatzen, Morten; Lin Wang, Zhong (2018). "Theory of contact electrification: Optical transitions in two-level systems". Nano Energy. 52: 517–523. doi:10.1016/j.nanoen.2018.08.015. S2CID 106380058.</ref><ref name=":11" />

Explanations and mechanisms

From early work starting around the end of the 19th century<ref name=":37" /><ref name=":38" /><ref name=":33" /> a large amount of information is available about what, empirically, causes triboelectricity. While there is extensive experimental data on triboelectricity there is not as yet full scientific consensus on the source,<ref name=":14">Lacks, Daniel J. (2012). "The Unpredictability of Electrostatic Charging". Angewandte Chemie International Edition. 51 (28): 6822–6823. doi:10.1002/anie.201202896. PMID 22653881.</ref><ref name=":15">Lacks, Daniel J.; Shinbrot, Troy (2019). "Long-standing and unresolved issues in triboelectric charging". Nature Reviews Chemistry. 3 (8): 465–476. doi:10.1038/s41570-019-0115-1. ISSN 2397-3358. S2CID 197403212.</ref> or perhaps more probably the sources. Some aspects are established, and will be part of the full picture:

  • Work function differences between the two materials.<ref name=":2" />
  • Local curvature, strain and roughness.<ref name=":8" /><ref name=":19" /><ref name=":21" />
  • The forces used during sliding, and the velocities when particles collide as well as the sizes.<ref name=":10" /><ref name=":17" />
  • The electronic structure of the materials, and the crystallographic orientation of the two contacting materials.<ref name=":1" />
  • Surface or interface states, as well as environmental factors such as humidity.<ref name=":1" /><ref name=":2" />

Triboelectric series

A simple triboelectric series

An empirical approach to triboelectricity is a triboelectric series. This is a list of materials ordered by how they develop a charge relative to other materials on the list. Johan Carl Wilcke published the first one in a 1757 paper.<ref name=":35" /><ref name="Dictionary of Scientific Biography" /> The series was expanded by Shaw<ref name=":19" /> and Henniker<ref name=":32" /> by including natural and synthetic polymers, and included alterations in the sequence depending on surface and environmental conditions. Lists vary somewhat as to the order of some materials.<ref name=":19">Shaw, P. E. (1917). "Experiments on tribo-electricity. I.—The tribo-electric series". Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character. 94 (656): 16–33. Bibcode:1917RSPSA..94...16S. doi:10.1098/rspa.1917.0046. ISSN 0950-1207.</ref><ref name=":32">Henniker J (1962). "Triboelectricity in Polymers". Nature. 196 (4853): 474. Bibcode:1962Natur.196..474H. doi:10.1038/196474a0. S2CID 4211729.</ref>

Another triboelectric series based on measuring the triboelectric charge density of materials was proposed by the group of Zhong Lin Wang. The triboelectric charge density of the tested materials was measured with respect to liquid mercury in a glove box under well-defined conditions, with fixed temperature, pressure and humidity.<ref name=":0">Zou H, Zhang Y, Guo L, Wang P, He X, Dai G, et al. (2019). "Quantifying the triboelectric series". Nature Communications. 10 (1): 1427. Bibcode:2019NatCo..10.1427Z. doi:10.1038/s41467-019-09461-x. PMC 6441076. PMID 30926850.</ref>

Cyclic triboelectric series example, illustrating that a linear approach does not work in practice.

It is known that this approach is too simple and unreliable.<ref name=":1" /><ref name=":2" /><ref name=":3">Lowell, J.; Rose-Innes, A.C. (1980). "Contact electrification". Advances in Physics. 29 (6): 947–1023. Bibcode:1980AdPhy..29..947L. doi:10.1080/00018738000101466. ISSN 0001-8732.</ref> There are many cases where there are triangles: material A is positive when rubbed against B, B is positive when rubbed against C, and C is positive when rubbed against A, an issue mentioned by Shaw in 1914.<ref name=":33" /> This cannot be explained by a linear series, cyclic series are inconsistent with the empirical triboelectric series.<ref>Pan, Shuaihang; Zhang, Zhinan (2019). "Fundamental theories and basic principles of triboelectric effect: A review". Friction. 7 (1): 2–17. doi:10.1007/s40544-018-0217-7. ISSN 2223-7690. S2CID 256406551.</ref> Furthermore, there are many cases where charging occurs with contacts between two pieces of the same material.<ref>Lowell, J.; Truscott, W. S. (1986). "Triboelectrification of identical insulators. I. An experimental investigation". Journal of Physics D: Applied Physics. 19 (7): 1273–1280. Bibcode:1986JPhD...19.1273L. doi:10.1088/0022-3727/19/7/017. ISSN 0022-3727. S2CID 250769950.</ref><ref>Lowell, J.; Truscott, W. S. (1986). "Triboelectrification of identical insulators. II. Theory and further experiments". Journal of Physics D: Applied Physics. 19 (7): 1281–1298. Bibcode:1986JPhD...19.1281L. doi:10.1088/0022-3727/19/7/018. ISSN 0022-3727. S2CID 250811149.</ref><ref name=":9">Baytekin, H. T.; Patashinski, A. Z.; Branicki, M.; Baytekin, B.; Soh, S.; Grzybowski, B. A. (2011). "The Mosaic of Surface Charge in Contact Electrification". Science. 333 (6040): 308–312. Bibcode:2011Sci...333..308B. doi:10.1126/science.1201512. hdl:20.500.11820/f416715b-eaa4-4051-a054-a6cd527a6066. ISSN 0036-8075. PMID 21700838. S2CID 18450118.</ref> This has been modelled as a consequence of the electric fields from local bending (flexoelectricity).<ref name=":5" /><ref name=":26" /><ref name=":25">Persson, B. N. J. (2020). "On the role of flexoelectricity in triboelectricity for randomly rough surfaces". EPL (Europhysics Letters). 129 (1): 10006. arXiv:1911.06207. Bibcode:2020EL....12910006P. doi:10.1209/0295-5075/129/10006. ISSN 1286-4854. S2CID 208615180.</ref>

Work function differences

When the two metals depicted here are in thermodynamic equilibrium with each other as shown (equal Fermi levels), the vacuum electrostatic potential ϕ is not flat due to a difference in work function.

In all materials there is a positive electrostatic potential from the positive atomic nuclei, partially balanced by a negative electrostatic potential of what can be described as a sea of electrons.<ref name=":16">Ashcroft, Neil W.; Mermin, N. David (1976). Solid State Physics. Cengage Learning. ISBN 978-0-03-083993-1.</ref> The average potential is positive, what is called the mean inner potential (MIP). Different materials have different MIPs, depending upon the types of atoms and how close they are. At a surface the electrons also spill out a little into the vacuum, as analyzed in detail by Kohn and Liang.<ref name=":16" /><ref name=":20">Lang, N. D.; Kohn, W. (1971). "Theory of Metal Surfaces: Work Function". Physical Review B. 3 (4): 1215–1223. Bibcode:1971PhRvB...3.1215L. doi:10.1103/PhysRevB.3.1215. ISSN 0556-2805.</ref> This leads to a dipole at the surface. Combined, the dipole and the MIP lead to a potential barrier for electrons to leave a material which is called the work function.<ref name=":16" />

A rationalization of the triboelectric series is that different members have different work functions, so electrons can go from the material with a small work function to one with a large.<ref name=":1" /> The potential difference between the two materials is called the Volta potential, also called the contact potential. Experiments have validated the importance of this for metals and other materials.<ref name=":4" /> However, because the surface dipoles vary for different surfaces of any solid<ref name=":16" /><ref name=":20" /> the contact potential is not a universal parameter. By itself it cannot explain many of the results which were established in the early 20th century.<ref name=":6" /><ref name=":7" /><ref name=":8" />

Electromechanical contributions

Whenever a solid is strained, electric fields can be generated. One process is due to linear strains, and is called piezoelectricity, the second depends upon how rapidly strains are changing with distance (derivative) and is called flexoelectricity. Both are established science, and can be both measured and calculated using density functional theory methods. Because flexoelectricity depends upon a gradient it can be much larger at the nanoscale during sliding or contact of asperity between two objects.<ref name=":18" />

There has been considerable work on the connection between piezoelectricity and triboelectricity.<ref>Peterson, John W. (1949). "The Influence of Piezo-Electrification on Tribo-Electrification". Physical Review. 76 (12): 1882–1883. Bibcode:1949PhRv...76.1882P. doi:10.1103/PhysRev.76.1882.2. ISSN 0031-899X.</ref><ref>Harper, W. R. (1955). "Adhesion and charging of quartz surfaces". Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences. 231 (1186): 388–403. Bibcode:1955RSPSA.231..388H. doi:10.1098/rspa.1955.0182. ISSN 0080-4630. S2CID 137276822.</ref> While it can be important, piezoelectricity only occurs in the small number of materials which do not have inversion symmetry,<ref name=":16" /> so it is not a general explanation. It has recently been suggested that flexoelectricity may be very important<ref name=":5" /> in triboelectricity as it occurs in all insulators and semiconductors.<ref name=":29">Zubko, Pavlo; Catalan, Gustau; Tagantsev, Alexander K. (2013). "Flexoelectric Effect in Solids". Annual Review of Materials Research. 43 (1): 387–421. Bibcode:2013AnRMS..43..387Z. doi:10.1146/annurev-matsci-071312-121634. hdl:10261/99362. ISSN 1531-7331.</ref><ref>Arias, Irene; Catalan, Gustau; Sharma, Pradeep (2022). "The emancipation of flexoelectricity". Journal of Applied Physics. 131 (2): 020401. Bibcode:2022JAP...131b0401A. doi:10.1063/5.0079319. hdl:10261/280763. ISSN 0021-8979. S2CID 245897525.</ref> Quite a few of the experimental results such as the effect of curvature can be explained by this approach, although full details have not as yet been determined.<ref name=":26">Mizzi, Christopher A.; Marks, Laurence D. (2022). "When Flexoelectricity Drives Triboelectricity". Nano Letters. 22 (10): 3939–3945. Bibcode:2022NanoL..22.3939M. doi:10.1021/acs.nanolett.2c00240. ISSN 1530-6984. PMID 35575563. S2CID 225070213.</ref> There is also early work from Shaw and Hanstock,<ref name="royalsocietypublishing.org"/> and from the group of Daniel Lacks demonstrating that strain matters.<ref>Sow, Mamadou; Lacks, Daniel J.; Mohan Sankaran, R. (2012). "Dependence of contact electrification on the magnitude of strain in polymeric materials". Journal of Applied Physics. 112 (8): 084909–084909–5. Bibcode:2012JAP...112h4909S. doi:10.1063/1.4761967. ISSN 0021-8979.</ref><ref>Sow, Mamadou; Lacks, Daniel J.; Sankaran, R. Mohan (2013). "Effects of material strain on triboelectric charging: Influence of material properties". Journal of Electrostatics. 71 (3): 396–399. doi:10.1016/j.elstat.2012.11.021.</ref><ref name=":21">Xie, L.; He, P. F.; Zhou, J.; Lacks, D. J. (2014). "Correlation of contact deformation with contact electrification of identical materials". Journal of Physics D: Applied Physics. 47 (21): 215501. Bibcode:2014JPhD...47u5501X. doi:10.1088/0022-3727/47/21/215501. ISSN 0022-3727. S2CID 121319419.</ref>

A different type of model has been proposed by Robert Alicki and Alejandro Jenkins.<ref name=":11" /> They argue that the electrons in the two materials that slide against each other have different velocities, and that quantum effects cause this imbalance to pump electrons from one material to the other.<ref name=":11" />

Capacitor charge compensation model

Capacitor schematic with dielectric

An explanation that has appeared in different forms is analogous to charge on a capacitor. If there is a potential difference between two materials due to the difference in their work functions (contact potential), this can be thought of as equivalent to the potential difference across a capacitor. The charge to compensate this is that which cancels the electric field. If an insulating dielectric is in between the two materials, then this will lead to a polarization density <math>\mathbf P</math> and a bound surface charge of <math>\mathbf P \cdot \mathbf n</math>, where <math>\mathbf n</math> is the surface normal.<ref>Fisher, L. H. (1951). "On the Representation of the Static Polarization of Rigid Dielectrics by Equivalent Charge Distributions". American Journal of Physics. 19 (2): 73–78. Bibcode:1951AmJPh..19...73F. doi:10.1119/1.1932714. ISSN 0002-9505.</ref><ref>"Electrodynamics", Introduction to Electrodynamics, Cambridge University Press, pp. 296–354, 29 June 2017, doi:10.1017/9781108333511.008, ISBN 978-1-108-33351-1</ref> The total charge in the capacitor is then the combination of the bound surface charge from the polarization and that from the potential.

The triboelectric charge from this compensation model has been frequently considered as a key component.<ref>Ireland, Peter M. (2010). "Triboelectrification of particulate flows on surfaces: Part II — Mechanisms and models". Powder Technology. 198 (2): 199–210. doi:10.1016/j.powtec.2009.11.008.</ref><ref>Matsusaka, S.; Maruyama, H.; Matsuyama, T.; Ghadiri, M. (2010). "Triboelectric charging of powders: A review". Chemical Engineering Science. 65 (22): 5781–5807. Bibcode:2010ChEnS..65.5781M. doi:10.1016/j.ces.2010.07.005. hdl:2433/130693.</ref><ref>Xie, Li; Li, Junjie; Liu, Yakui (2020). "Review on charging model of sand particles due to collisions". Theoretical and Applied Mechanics Letters. 10 (4): 276–285. doi:10.1016/j.taml.2020.01.047. ISSN 2095-0349. S2CID 225960006.</ref><ref>Han, Chun; Zhou, Qun; Hu, Jiawei; Liang, Cai; Chen, Xiaoping; Ma, Jiliang (2021). "The charging characteristics of particle–particle contact". Journal of Electrostatics. 112: 103582. doi:10.1016/j.elstat.2021.103582. S2CID 235513618.</ref> If the additional polarization due to strain (piezoelectricity) or bending of samples (flexoelectricity) is included<ref name=":5" /><ref name=":26" /> this can explain observations such as the effect of curvature<ref name=":8" /> or inhomogeneous charging.<ref name=":25" />

Electron and/or ion transfer

There is debate about whether electrons or ions are transferred in triboelectricity. For instance Harper<ref name=":2" /> discusses both possibilities, whereas Vick<ref name=":1" /> was more in favor of electron transfer. The debate remains to this day with, for instance, George M. Whitesides advocating for ions,<ref>McCarty, Logan S.; Whitesides, George M. (2008). "Electrostatic Charging Due to Separation of Ions at Interfaces: Contact Electrification of Ionic Electrets". Angewandte Chemie International Edition. 47 (12): 2188–2207. doi:10.1002/anie.200701812. PMID 18270989.</ref> while others support electrons.<ref>Diaz, A. F.; Fenzel-Alexander, D. (1993). "An ion transfer model for contact charging". Langmuir. 9 (4): 1009–1015. doi:10.1021/la00028a021. ISSN 0743-7463.</ref><ref>Liu, Chongyang; Bard, Allen J. (2008). "Electrostatic electrochemistry at insulators". Nature Materials. 7 (6): 505–509. Bibcode:2008NatMa...7..505L. doi:10.1038/nmat2160. ISSN 1476-4660. PMID 18362908.</ref>

Humidity

Generally, increased humidity (water in the air) leads to a decrease in the magnitude of triboelectric charging.<ref>Matsusaka, S.; Maruyama, H.; Matsuyama, T.; Ghadiri, M. (2010). "Triboelectric charging of powders: A review". Chemical Engineering Science. 65 (22): 5781–5807. Bibcode:2010ChEnS..65.5781M. doi:10.1016/j.ces.2010.07.005. hdl:2433/130693. ISSN 0009-2509.</ref> The size of this effect varies greatly depending on the contacting materials; the decrease in charging ranges from up to a factor of 10 or more to very little humidity dependence.<ref>Németh, Ernő; Albrecht, Victoria; Schubert, Gert; Simon, Frank (2003). "Polymer tribo-electric charging: dependence on thermodynamic surface properties and relative humidity". Journal of Electrostatics. 58 (1–2): 3–16. doi:10.1016/S0304-3886(02)00137-7.</ref> Some experiments find increased charging at moderate humidity compared to extremely dry conditions before a subsequent decrease at higher humidity.<ref name=":31">Pence, S.; Novotny, V. J.; Diaz, A. F. (1994). "Effect of Surface Moisture on Contact Charge of Polymers Containing Ions". Langmuir. 10 (2): 592–596. doi:10.1021/la00014a042.</ref> The most widespread explanation is that higher humidity leads to more water adsorbed at the surface of contacting materials, leading to a higher surface conductivity.<ref name=":30">Németh, Ernő; Albrecht, Victoria; Schubert, Gert; Simon, Frank (2003). "Polymer tribo-electric charging: dependence on thermodynamic surface properties and relative humidity". Journal of Electrostatics. 58 (1): 3–16. doi:10.1016/S0304-3886(02)00137-7. ISSN 0304-3886.</ref><ref>Awakuni, Y; Calderwood, J H (1972). "Water vapour adsorption and surface conductivity in solids". Journal of Physics D: Applied Physics. 5 (5): 1038–1045. Bibcode:1972JPhD....5.1038A. doi:10.1088/0022-3727/5/5/323. S2CID 250802832.</ref> The higher conductivity allows for greater charge recombination as contacts separate, resulting in a smaller transfer of charge.<ref name=":30" /><ref>Lesprit, Ugo; Paillat, Thierry; Zouzou, Noureddine; Paquier, Anna; Yonger, Marc (2021). "Triboelectric charging of a glass bead impacting against polymers: Antistatic effects in glass/PU electrification in a humidity-controlled environment". Journal of Electrostatics. 113: 103605. doi:10.1016/j.elstat.2021.103605. ISSN 0304-3886.</ref><ref>Toth, Joseph R.; Phillips, Amber K.; Rajupet, Siddharth; Sankaran, R. Mohan; Lacks, Daniel J. (2017). "Particle-Size-Dependent Triboelectric Charging in Single-Component Granular Materials: Role of Humidity". Industrial & Engineering Chemistry Research. 56 (35): 9839–9845. doi:10.1021/acs.iecr.7b02328. ISSN 0888-5885.</ref> Another proposed explanation for humidity effects considers the case when charge transfer is observed to increase with humidity in dry conditions. Increasing humidity may lead to the formation of water bridges between contacting materials that promote the transfer of ions.<ref name=":31" />

Examples

Friction and adhesion from tribocharging

Friction<ref>Popova, Elena; Popov, Valentin L. (2015). "The research works of Coulomb and Amontons and generalized laws of friction". Friction. 3 (2): 183–190. doi:10.1007/s40544-015-0074-6. ISSN 2223-7704. S2CID 256405946.</ref> is a retarding force due to different energy dissipation process such as elastic and plastic deformation, phonon and electron excitation, and also adhesion.<ref>Stachowiak, Gwidon; Batchelor, Andrew W. (2011). Engineering Tribology. Elsevier. ISBN 978-0-08-053103-8.</ref> As an example, in a car or any other vehicle the wheels elastically deform as they roll. Part of the energy needed for this deformation is recovered (elastic deformation), some is not and goes into heating the tires. The energy which is not recovered contributes to the back force, a process called rolling friction.

Similar to rolling friction there are energy terms in charge transfer, which contribute to friction. In static friction there is coupling between elastic strains, polarization and surface charge which contributes to the frictional force.<ref name=":29" /> In sliding friction,<ref>Persson, Bo (2000). Sliding Friction: Physical Principles and Applications. Springer Science & Business Media. ISBN 978-3-540-67192-3.</ref> when asperities contact<ref name=":18" /> and there is charge transfer, some of the charge returns as the contacts are released, some does not<ref>Ko, Hyunseok; Lim, Yeong-won; Han, Seungwu; Jeong, Chang Kyu; Cho, Sung Beom (2021). "Triboelectrification: Backflow and Stuck Charges Are Key". ACS Energy Letters. 6 (8): 2792–2799. doi:10.1021/acsenergylett.1c01019. ISSN 2380-8195. S2CID 237720731.</ref> and will contribute to the macroscopically observed friction. There is evidence for a retarding Coulomb force between asperities of different charges,<ref name="Burgo1">Burgo, Thiago A. L.; Silva, Cristiane A.; Balestrin, Lia B. S.; Galembeck, Fernando (2013). "Friction coefficient dependence on electrostatic tribocharging". Scientific Reports. 3 (1): 2384. Bibcode:2013NatSR...3E2384B. doi:10.1038/srep02384. ISSN 2045-2322. PMC 3740278. PMID 23934227.</ref> and an increase in the adhesion from contact electrification when geckos walk on water.<ref>Izadi, Hadi; Stewart, Katherine M. E.; Penlidis, Alexander (2014). "Role of contact electrification and electrostatic interactions in gecko adhesion". Journal of the Royal Society Interface. 11 (98). doi:10.1098/rsif.2014.0371. ISSN 1742-5689. PMC 4233685. PMID 25008078.</ref> There is also evidence of connections between jerky (stick–slip) processes during sliding with charge transfer,<ref name=":12" /> electrical discharge<ref>Schnurmann, Robert; Warlow-Davies, Eric (1942). "The electrostatic component of the force of sliding friction". Proceedings of the Physical Society. 54 (1): 14–27. Bibcode:1942PPS....54...14S. doi:10.1088/0959-5309/54/1/303. ISSN 0959-5309.</ref> and x-ray emission.<ref>Camara, Carlos G.; Escobar, Juan V.; Hird, Jonathan R.; Putterman, Seth J. (2008). "Correlation between nanosecond X-ray flashes and stick–slip friction in peeling tape". Nature. 455 (7216): 1089–1092. Bibcode:2008Natur.455.1089C. doi:10.1038/nature07378. ISSN 0028-0836. S2CID 4372536.</ref> How large the triboelectric contribution is to friction has been debated. It has been suggested by some<ref name="Burgo1" /> that it may dominate for polymers, whereas Harper<ref>Harper, W. R. (1955). "Adhesion and charging of quartz surfaces". Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences. 231 (1186): 388–403. Bibcode:1955RSPSA.231..388H. doi:10.1098/rspa.1955.0182. ISSN 0080-4630. S2CID 137276822.</ref> has argued that it is small.

Liquids and gases

Illustration of tribocharge generated from a sliding drop

The generation of static electricity from the relative motion of liquids or gases is well established, with one of the first analyses in 1886 by Lord Kelvin in his water dropper which used falling drops to create an electric generator.<ref>Thomson, W. (1868). "XVI. On a self-acting apparatus for multiplying and maintaining electric charges, with applications to illustrate the voltaic theory". Proceedings of the Royal Society of London. 16: 67–72. doi:10.1098/rspl.1867.0019. ISSN 0370-1662. S2CID 110760051.</ref> Liquid mercury is a special case as it typically acts as a simple metal, so has been used as a reference electrode.<ref name=":34">Freund, Thomas (1979). "Tribo-electricity". Advances in Colloid and Interface Science. 11 (1): 43–66. doi:10.1016/0001-8686(79)80003-2.</ref> More common is water, and electricity due to water droplets hitting surfaces has been documented since the discovery by Philipp Lenard in 1892 of the spray electrification or waterfall effect.<ref>Lenard, Philipp (1892). "Ueber die Electricität der Wasserfälle". Annalen der Physik und Chemie. 282 (8): 584–636. Bibcode:1892AnP...282..584L. doi:10.1002/andp.18922820805. ISSN 0003-3804.</ref><ref>Loeb, Leonard B. (1958). Static Electrification. Berlin / Heidelberg: Springer. doi:10.1007/978-3-642-88243-2. ISBN 978-3-642-88245-6.</ref> This is when falling water generates static electricity either by collisions between water drops or with the ground, leading to the finer mist in updrafts being mainly negatively charged, with positive near the lower surface. It can also occur for sliding drops.<ref>Helseth, L. E.; Wen, H Z (2017). "Visualisation of charge dynamics when water droplets move off a hydrophobic surface". European Journal of Physics. 38 (5): 055804. Bibcode:2017EJPh...38e5804H. doi:10.1088/1361-6404/aa82f7. ISSN 0143-0807. S2CID 125757544.</ref>

Another type of charge can be produced during rapid solidification of water containing ions, which is called the Workman–Reynolds effect.<ref>Gross, Gerardo Wolfgang (1965). "The Workman–Reynolds effect and ionic transfer processes at the ice-solution interface". Journal of Geophysical Research. 70 (10): 2291–2300. Bibcode:1965JGR....70.2291G. doi:10.1029/jz070i010p02291. ISSN 0148-0227.</ref> During the solidification the positive and negative ions may not be equally distributed between the liquid and solid.<ref>Aziz, M. J. (1982). "Model for solute redistribution during rapid solidification". Journal of Applied Physics. 53 (2): 1158–1168. Bibcode:1982JAP....53.1158A. doi:10.1063/1.329867. ISSN 0021-8979.</ref> For instance, in thunderstorms this can contribute (together with the waterfall effect) to separation of positive hydrogen ions and negative hydroxide ions, leading to static charge and lightning.<ref>Illingworth, A. J. (1985). "Charge separation in thunderstorms: Small scale processes". Journal of Geophysical Research. 90 (D4): 6026. Bibcode:1985JGR....90.6026I. doi:10.1029/JD090iD04p06026. ISSN 0148-0227.</ref>

A third class is associated with contact potential differences between liquids or gases and other materials, similar to the work function differences for solids. It has been suggested that a triboelectric series for liquids is useful.<ref>Yoo, Donghyeon; Jang, Sunmin; Cho, Sumin; Choi, Dongwhi; Kim, Dong Sung (2023). "A Liquid Triboelectric Series". Advanced Materials. 35 (26): e2300699. Bibcode:2023AdM....3500699Y. doi:10.1002/adma.202300699. ISSN 0935-9648. PMID 36947827. S2CID 257695984.</ref> One difference from solids is that often liquids have charged double layers, and most of the work to date supports that ion transfer (rather than electron) dominates for liquids<ref>Wong, William S. Y.; Bista, Pravash; Li, Xiaomei; Veith, Lothar; Sharifi-Aghili, Azadeh; Weber, Stefan A. L.; Butt, Hans-Jürgen (2022). "Tuning the Charge of Sliding Water Drops". Langmuir. 38 (19): 6224–6230. doi:10.1021/acs.langmuir.2c00941. ISSN 0743-7463. PMC 9118544. PMID 35500291.</ref> as first suggested by Irving Langmuir in 1938.<ref>Langmuir, Irving (1938). "Surface Electrification Due to the Recession of Aqueous Solutions from Hydrophobic Surfaces". Journal of the American Chemical Society. 60 (5): 1190–1194. doi:10.1021/ja01272a054. ISSN 0002-7863.</ref>

Finally, with liquids there can be flow-rate gradients at interfaces, and also viscosity gradients. These can produce electric fields and also polarization of the liquid, a field called electrohydrodynamics.<ref>Papageorgiou, Demetrios T. (2019). "Film Flows in the Presence of Electric Fields". Annual Review of Fluid Mechanics. 51 (1): 155–187. Bibcode:2019AnRFM..51..155P. doi:10.1146/annurev-fluid-122316-044531. ISSN 0066-4189. S2CID 125898175.</ref> These are analogous to the electromechanical terms for solids where electric fields can occur due to elastic strains as described earlier.

Powders

During commercial powder processing<ref name=":10" /><ref>Castellanos, A. (2005). "The relationship between attractive interparticle forces and bulk behaviour in dry and uncharged fine powders". Advances in Physics. 54 (4): 263–376. Bibcode:2005AdPhy..54..263C. doi:10.1080/17461390500402657. ISSN 0001-8732. S2CID 122683411.</ref><ref>Grosshans, Holger; Jantač, Simon (2023). "Recent progress in CFD modeling of powder flow charging during pneumatic conveying". Chemical Engineering Journal. 455: 140918. arXiv:2212.04915. doi:10.1016/j.cej.2022.140918. S2CID 254535685.</ref> or in natural processes such as dust storms,<ref>Rudge, W. A. Douglas (1912). "LXXXI. A note on the electrification of the atmosphere and surface of the earth". The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science. 23 (137): 852–855. doi:10.1080/14786440508637281. ISSN 1941-5982.</ref><ref>Kunkel, W. B. (1950). "The Static Electrification of Dust Particles on Dispersion into a Cloud". Journal of Applied Physics. 21 (8): 820–832. Bibcode:1950JAP....21..820K. doi:10.1063/1.1699765. ISSN 0021-8979.</ref><ref name=":24" /> triboelectric charge transfer can occur. There can be electric fields of up to 160kV/m with moderate wind conditions, which leads to Coulomb forces of about the same magnitude as gravity.<ref>Schmidt, D. S.; Schmidt, R. A.; Dent, J. D. (1998). "Electrostatic force on saltating sand". Journal of Geophysical Research: Atmospheres. 103 (D8): 8997–9001. Bibcode:1998JGR...103.8997S. doi:10.1029/98jd00278. ISSN 0148-0227.</ref> There does not need to be air present, significant charging can occur, for instance, on airless planetary bodies.<ref>Wang, X.; Schwan, J.; Hsu, H.-W.; Grün, E.; Horányi, M. (2016). "Dust charging and transport on airless planetary bodies: Electrostatic Dust Transport". Geophysical Research Letters. 43 (12): 6103–6110. doi:10.1002/2016GL069491. S2CID 132181033.</ref> With pharmaceutic powders and other commercial powders the tribocharging needs to be controlled for quality control of the materials and doses. Static discharge is also a particular hazard in grain elevators owing to the danger of a dust explosion,<ref>Glor, Martin (2009). "Ignition source static electricity: Incident investigation". Journal of Electrostatics. 67 (2–3): 242–246. doi:10.1016/j.elstat.2009.01.016. ISSN 0304-3886.</ref> in places that store explosive powders,<ref>Lotfzadeh, Habibeh; Khorasanloo, Fatemeh Hemmati; Fathollahi, Manoochehr (2020). "Reduction of electrostatic charging PETN and HMX explosives by PVP and ionic liquid". Journal of Electrostatics. 108: 103513. doi:10.1016/j.elstat.2020.103513. ISSN 0304-3886. S2CID 224879902.</ref> and in many other cases.<ref>Sandu, Ioana; Resticcia, Francesco (2021). Static Electricity Incident Review (PDF). Quincy, Massachusetts: Fire Protection Research Foundation.</ref> Triboelectric powder separation has been discussed as a method of separating powders, for instance different biopolymers.<ref>Żenkiewicz, Marian; Żuk, Tomasz; Markiewicz, Ewa (2015). "Triboelectric series and electrostatic separation of some biopolymers". Polymer Testing. 42: 192–198. doi:10.1016/j.polymertesting.2015.01.009. ISSN 0142-9418.</ref> The principle here is that different degrees of charging can be exploited for electrostatic separation, a general concept for powders.<ref>El-Mouloud Zelmat, Mohamed; Rizouga, Mohamed; Tilmatine, Amar; Medles, Karim; Miloudi, Mohamed; Dascalescu, Lucien (2013). "Experimental Comparative Study of Different Tribocharging Devices for Triboelectric Separation of Insulating Particles". IEEE Transactions on Industry Applications. 49 (3): 1113–1118. doi:10.1109/tia.2013.2251991. ISSN 0093-9994. S2CID 16419622.</ref>

In industry

Static electricity hazard sign (ISO 7010)

There are many areas in industry where triboelectricity is known to be an issue. some examples are:

Other examples

Static wicks on a Winglet Airbus A319-132

While the simple case of stroking a cat is familiar to many, there are other areas in modern technological civilization where triboelectricity is exploited or is a concern:

  • Air moving past an aircraft can lead to a buildup of charge; aircraft typically have one or more static wicks to remove it.<ref>Pettit, Duane; Turnbull, Andrew; Roelant, Henk A. (1 February 2001). "General Aviation Aircraft Reliability Study". National Aeronautics and Space Administration.</ref> Checking the status of these is a standard task for pilots.<ref>Tallman, Jill (11 January 2019). "How It Works: Static Wick". www.aopa.org. Retrieved 12 July 2023.</ref> Similarly, helicopter blades move fast, and tribocharging can generate voltages up to 200 kV.<ref>Siebert, Jame M. (1 June 1962). "Helicopter Static-Electricity Measurements". Defence Technical Information Center – via Army Transportation Research Command, Fort Eustis, VA.</ref>
  • During planetary formation, a key step is aggregation of dust or smaller particles.<ref name=":36" /> There is evidence that triboelectric charging during collisions of granular material plays a key role in overcoming barriers to aggregation.<ref>Steinpilz, Tobias; Joeris, Kolja; Jungmann, Felix; Wolf, Dietrich; Brendel, Lothar; Teiser, Jens; Shinbrot, Troy; Wurm, Gerhard (2020). "Electrical charging overcomes the bouncing barrier in planet formation". Nature Physics. 16 (2): 225–229. Bibcode:2020NatPh..16..225S. doi:10.1038/s41567-019-0728-9. ISSN 1745-2473. S2CID 256713457.</ref>
  • Single-use medical protective clothing have to fulfill certain triboelectric charging regulations in China.<ref>Zheng, Wayne (ed.). "National Standard of the People's Republic of China". www.chinesestandard.net. Retrieved 17 July 2023.</ref>
  • Space vehicles can accumulate significant tribocharge which can interfere with communications such as the sending of self-destruct signals. Some launches have been delayed by weather conditions where tribocharging could occur.<ref>Shiga, David (27 October 2009). "Static electricity worry halts NASA rocket test flight". New Scientist. Retrieved 12 July 2023.</ref>
  • Triboelectric nanogenerators are energy harvesting devices which convert mechanical energy into electricity.<ref>Cheng, Tinghai; Shao, Jiajia; Wang, Zhong Lin (2023). "Triboelectric nanogenerators". Nature Reviews Methods Primers. 3 (1). doi:10.1038/s43586-023-00220-3. ISSN 2662-8449. S2CID 258745825.</ref>
  • Triboelectric noise within medical cable assemblies and lead wires is generated when the conductors, insulation, and fillers rub against each other as the cables are flexed during movement. Keeping triboelectric noise at acceptable levels requires careful material selection, design, and processing.<ref>Molex (29 August 2014). "Triboelectric Noise in Medical Cables and Wires".</ref> It is also an issue with underwater electroacoustic transducers if there are flexing motions of the cables; the mechanism is believed to involve relative motion between a dielectric and a conductor in the cable.<ref>Donovan, John E. (1970). "Triboelectric Noise Generation in Some Cables Commonly Used with Underwater Electroacoustic Transducers". The Journal of the Acoustical Society of America. 48 (3B): 714–724. Bibcode:1970ASAJ...48..714D. doi:10.1121/1.1912194. ISSN 0001-4966.</ref>
Antistatic belts on a car in Russia in 2014

See also

References

<references group="" responsive="0"></references>

External links

Retrieved from "https://kynnco.com:443/kynnpedia/index.php?title=Triboelectric_effect&oldid=557"